Vol 4, No 1 (2024)

(April)

Journal of Mechanical Engineering, Science, and Innovation Vol. 04 No. 1, 2024 contains Eight papers with the authors' diversity came from:

  • Department of Chemical Engineering, Balochistan University of Information Technology Engineering & Management Sciences (BUITEMS), Quetta, Balochistan, Pakistan.
  • Department of Chemical Engineering, Faculty of Engineering, Mehran University of Engineering & Technology Jamshoro, Pakistan
  • Department of Chemical Engineering, Faculty of Engineering, Modibbo Adama University (MAU), PMB 2076, Yola, Adamawa State, Nigeria
  • Institute of Petroleum and Natural Gas Engineering, MUET, Jamshoro, Sindh, Pakistan
  • Sustainable Environment Research Group (SERG), Centre of Excellence Geopolymer and Green Technologies (CEGeoGTech), Universiti Malaysia Perlis, 02600 Arau, Perlis, Malaysia
  • Department of Chemistry, Faculty of Sciences, University of Douala, P.O. Box 24157, Douala, Cameroon
  • Politeknik Negeri Batam, Indonesia
  • Politeknik Perkapalan Negeri Surabaya, Indonesia
  • PT. Caterpillar Indonesia Batam, Indonesia
  • Malang National Institute of Technology, Indonesia
  • Mechanical Engineering Study Program, Faculty of Engineering, East Java Veteran National Development University, Indonesia.
  • Manufacturing Engineering Technology, Universitas Negeri Malang, Indonesia
  • Department of Mechanical Engineering, Universitas Nahdlatul Ulama Blitar, Indonesia
  • Department of Mechanical Engineering, Universitas Islam Malang, Indonesia
  • Department of Mechanical Engineering, Universitas Negeri Malang, Indonesia
  • Institut Teknologi Sepuluh Nopember Surabaya, Indonesia
  • Institut Teknologi Adhi Tama Surabaya, Indonesia
  • Research Center for Polymer Technology, National Research and Innovation Agency (BRIN) Serpong, Indonesia
  • Department of Mechanical Engineering, University of Sultan Ageng Tirtayasa, Indonesia

Table of Contents

Cover and Editorial Page
 
PDF
i-iv

Articles

Lignite Coal Co-combustion Performance with Banana Tree Waste, Tree Leaves and Cow Dung Manure Blends for Emission Reduction During Power Generation
Mohammad Siddique, Abdulhalim Musa Abubakar, Suhail Ahmed Soomro, Hafeez-ur-Rehman Memon, Irnis Azura Zakarya, Tome Sylvain
DOI: 10.31284/j.jmesi.2024.v4i1.5346
PDF
1-16
NDT Testing with Visual Testing Method in the Inside Upper Frame 6015 Area with GMAW Welding Based on 1E0099
Aulia Fajrin, Lalu Giat Juangsa Putra, Recky Sutrisno
DOI: 10.31284/j.jmesi.2024.v4i1.5125
PDF
17-26
Calculation Study of Double Pipe Type Heat Exchanger in LNG Plant Pre-Design with Capacity 250 tons/hour
Eky Novianarenti, Erlinda Ningsih, Nanik Astuti Rahman
DOI: 10.31284/j.jmesi.2024.v4i1.5164
PDF
27-34
Optimization of Fused Deposition Modeling (FDM) Machine Process Parameters for Polylactic Acid (PLA) Surface Roughness Using the Taguchi Approach
Mochammad Willdan Rosyadi, Adimas Dwi Prayoga, Abdi Satryo Mukti, Rolland Darin Khalifah Mahameru, Wahyu Dwi lestari
DOI: 10.31284/j.jmesi.2024.v4i1.5999
PDF
35-44
Optimization of Fused Deposition Modeling (FDM) Machine Parameters for Carbon Fiber Tensile Strength Using the Taguchi Method
Adimas Dwi Prayoga, Abdi Satryo Mukti, Rolland Darin Khalifah Mahameru, Willdan Rosyadi, Wahyu Dwi lestari
DOI: 10.31284/j.jmesi.2024.v4i1.5987
PDF
45-56
Effect of Cryogenic Treatment on Hardness Value and Microstructure of Medium Carbon Steel
Dewi Izzatus Tsamroh, Johan Wayan Dika, Cepi Yazirin, Muhammad Ilman Nur Sasongko, Ardianto Prasetiyo
DOI: 10.31284/j.jmesi.2024.v4i1.5972
PDF
57-64
Effects of UV Exposure on the Physical, Chemical, and Mechanical Properties of Silica Microballoon Reinforced Epoxy Composites
Muhammad Yunus, Hosta Ardhyananta, Mas Irfan Purbawanto Hidayat, Afira Ainur Rosidah, Joddy Arya Laksmono, Jayatin Jayatin, Diah Susanti, Ade Mundari Wijaya
DOI: 10.31284/j.jmesi.2024.v4i1.6159
PDF
65-74
Evaluation of exhaust emissions of diesel engine using pyrolysis waste plastics fuel
Agung Sudrajad, Sunardi Sunardi, Imron Rosyadi, Deni Iskandar
DOI: 10.31284/j.jmesi.2024.v4i1.5971
PDF
75-83