Vol 6, No 1 (2026)

(April)(On Progress)

Table of Contents

Articles

Analysis of Surface Defects on RAM BOP with Non-Destructive Testing and Crack Propagation Simulation to Detect Potential Crack Development
Fadhil Wibowo, Andoko Andoko, Yahya Zakaria
DOI: 10.31284/j.jmesi.2026.v6i1.8286
PDF
1-13
Effect of Cylinder Rotation Speed on Corn Drying Characteristics in a Rotary Dryer
Muhammad Al Fatih Habibi, Rudy Sutanto, Made Wirawan
DOI: 10.31284/j.jmesi.2026.v6i1.8620
PDF
14-25
Analysis of Environmental Indicators Eco Management and Audit Scheme (EMAS) to Improve Energy Efficiency Using the Sustainable Overall Throughput Effectiveness (SOTE) Indicator in the Production Department (Case Study: XYZ Company, Pasuruan, East Java)
Cayo Pungki Andrianto, Sukendro Broto Sasongko
DOI: 10.31284/j.jmesi.2026.v6i1.8656
PDF
26-41
Corrosion-Induced Failure Mechanisms in Bio-Nano Hybrid Coatings for Structural Applications
Maulidia Hendriani, Andoko Andoko, Riduwan Prasetya, Yahya Zakaria
DOI: 10.31284/j.jmesi.2026.v6i1.8625
PDF
42-58
Comparative Structural Performance Evaluation of Modified Stopper Mounting Designs in Conveyor Systems Using Finite Element Simulation
Maulidia Hendriani, Andoko Andoko, Riduwan Prasetya, Yahya Zakaria
DOI: 10.31284/j.jmesi.2026.v6i1.8501
PDF
59-79
Influence of Electroplating Time on the Hardness Properties of Nickel-Coated Aluminum
Margono Margono, Cavin Dwi Prasetyo, Moch Chamim, Deni Andriyansyah, Bondan Wiratmoko Budi Santoso, Deslana Avinda Krisna Putra, Arif Surono, Hassan Khamis Hassan
DOI: 10.31284/j.jmesi.2026.v6i1.8767
PDF
80-88
CFD-Validated Kriging Surrogate for Multi Objective Aerodynamic Optimization of a Go-Kart Drag–Lift Pareto Front under Pitching Moment Constraint
Ahmad Al Kafi, Ahmad Atif Fikri
PDF
89-103
Numerical Study of Thermal Hydraulic Performance Improvement in Double Pipe Heat Exchangers Using Different Corrugated Tube Geometries
Muhammad Hisyam Haidar Al Ghazi, Damora Rhakasywi, Fahrudin Fahrudin
DOI: 10.31284/j.jmesi.2026.v6i1.8748
PDF
104-118
Comparative Analysis of E5–E15 Fuel Blends and 10–14 g CVT Roller Mass on the Power–Torque Curves of a 110 cc Automatic Motorcycle
Muhammad Vendy Hermawan, Deni Andriyansyah, Muhammad Ilyas Safarudin
DOI: 10.31284/j.jmesi.2026.v6i1.8716
PDF
119-131
Comparison of Manual, AI Generative, and Hybrid Design on Structural Performance and Manufacturing Aspects of Truck Wheel Mounting Aid Frame using FEA in Fusion 360
Muhammad Najmul Aulia, Dony Satriyo Nugroho
DOI: 10.31284/j.jmesi.2026.v6i1.8749
PDF
132-147
A Comparative Study of the Effect of Water Level on a Performance of a Hemispherical Acrylic Solar Distiller for Seawater Desalination
Bambang Raharjo, La Ode Mohammad Firman
DOI: 10.31284/j.jmesi.2026.v6i1.8756
PDF
148-159