Balancing Mechanical Integrity and Sound-Damping Performance of Water Hyacinth–Reinforced Unsaturated Polyester Composites for Coastal Food-Processing Facilities
Abstract
Full Text:
PDFReferences
O. P. Ilo, M. D. Simatele, S. L. Nkomo, N. M. Mkhize, and N. G. Prabhu, “The benefits of water hyacinth (Eichhornia crassipes) for Southern Africa: A review,” Nov. 01, 2020, MDPI. doi: 10.3390/su12219222.
R. Sindhu et al., “Water hyacinth a potential source for value addition: An overview,” 2017, Elsevier Ltd. doi: 10.1016/j.biortech.2017.01.035.
S. Patel, “Threats, management and envisaged utilizations of aquatic weed Eichhornia crassipes: An overview,” Sep. 2012. doi: 10.1007/s11157-012-9289-4.
N. Sumrith, L. Techawinyutham, M. R. Sanjay, R. Dangtungee, and S. Siengchin, “Characterization of Alkaline and Silane Treated Fibers of ‘Water Hyacinth Plants’ and Reinforcement of ‘Water Hyacinth Fibers’ with Bioepoxy to Develop Fully Biobased Sustainable Ecofriendly Composites,” J. Polym. Environ., vol. 28, no. 10, pp. 2749–2760, Oct. 2020, doi: 10.1007/s10924-020-01810-y.
A. Tobías, A. Recio, J. Díaz, and C. Linares, “Health impact assessment of traffic noise in Madrid (Spain),” Environ. Res., vol. 137, pp. 136–140, Feb. 2015, doi: 10.1016/j.envres.2014.12.011.
L. Cao, Q. Fu, Y. Si, B. Ding, and J. Yu, “Porous materials for sound absorption,” Dec. 01, 2018, Elsevier Ltd. doi: 10.1016/j.coco.2018.05.001.
Arenas P J and CrockerJ M, “Recent Trends in Porous Sound-Absorbing Materials,” 2010.
Koizumi T, Tsujiuchi N, and Adachi A, High performance structures and composites. WIT Press, 2002.
H. Abral et al., “Mechanical properties of water hyacinth fibers - polyester composites before and after immersion in water,” Mater. Des., vol. 58, pp. 125–129, 2014, doi: 10.1016/j.matdes.2014.01.043.
O. Ujianto, D. Margetts, H. Santoso, and R. Sujarwadi, “Glass fiber reinforced unsaturated polyester: Effect of nanoclay and mixing time on tensile modulus, flammability, and wear resistance,” in Solid State Phenomena, Trans Tech Publications Ltd, 2017, pp. 110–114. doi: 10.4028/www.scientific.net/SSP.266.110.
D. A. Priyani, S. Prabowo, A. L. Juwono, and O. Ujianto, “The effect of clay and mixing conditions to fire resistant and mechanical property of unsaturated polyester - Glass fiber composites by a vacuum bagging method,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Nov. 2018. doi: 10.1088/1757-899X/432/1/012047.
A. Rifathin, I. B. P. Budiana, and O. Ujianto, “Formulating Stone Wastes and Unsaturated Polyester Resin for Building Material Using an Extreme Vertices Mixture Design,” Journal of The Institution of Engineers (India): Series D, vol. 105, no. 3, pp. 1715–1722, Dec. 2024, doi: 10.1007/s40033-023-00608-1.
S. Prabowo, O. Ujianto, R. Wijaya, and D. A. Priyani, “Effect of Clay, Mixing Speed, and Time on Mechanical Properties of Glass Fiber/Clay Reinforced Unsaturated Polyester Prepared by Vacuum Bag Technique,” Journal of The Institution of Engineers (India): Series D, vol. 105, no. 2, pp. 923–928, Aug. 2024, doi: 10.1007/s40033-023-00505-7.
S. Jullaprom, S. Buapool, and J. Wutisatwongkul, “Exploring Water Hyacinth for Sustainable Sound Absorber,” Journal of the Korean Wood Science and Technology, vol. 53, no. 1, pp. 66–76, 2025, doi: 10.5658/WOOD.2025.53.1.66.
M. Srisawas, T. Kerdkaew, and P. Chanlert, “From invasive species to bio-based composites: Utilizing water hyacinth for sound absorption and insulation,” Ind. Crops Prod., vol. 220, Nov. 2024, doi: 10.1016/j.indcrop.2024.119242.
M. Sjahmanto, F. Astuti, T. Suryana, and Suhendi, “Analysis of water hyacinth fiber-based on composite testing as sound damping with resin adhesive,” in AIP Conference Proceedings, American Institute of Physics Inc., Nov. 2022. doi: 10.1063/5.0114546.
M. Olivares-Marín, S. Román, V. Gómez Escobar, C. Moreno González, A. Chaves-Zapata, and B. Ledesma, “Thermal performance and sound absorption capability of water hyacinth stems-based materials,” J. Clean. Prod., vol. 425, Nov. 2023, doi: 10.1016/j.jclepro.2023.138903.
N. Flores Ramirez, Y. Sanchez Hernandez, J. Cruz de Leon, S. R. Vasquez Garcia, L. Domratcheva Lvova, and L. Garcia Gonzalez, “Composites from water hyacinth (Eichhornea crassipe) and polyester resin,” Fibers and Polymers, vol. 16, no. 1, pp. 196–200, Jan. 2015, doi: 10.1007/s12221-015-0196-5.
H. Abral, H. Putra, S. M. Sapuan, and M. R. Ishak, “Effect of Alkalization on Mechanical Properties of Water Hyacinth Fibers-Unsaturated Polyester Composites,” Polymer - Plastics Technology and Engineering, vol. 52, no. 5, pp. 446–451, Apr. 2013, doi: 10.1080/03602559.2012.748804.
D. N. Vicarneltor, O. Ujianto, H. S. Setijotomo, and Nurindah, “Optimization of Fiber Content and Alkali Treatment on Sound Damping Performances of Kenaf Core/Unsaturated Polyester Composites,” Macromol. Symp., vol. 391, no. 1, Jun. 2020, doi: 10.1002/masy.201900179.
F. Asdrubali, S. Schiavoni, and K. V Horoshenkov, “A Review of Sustainable Materials for Acoustic Applications,” 2012.
F. A. Radini, M. Ghozali, O. Ujianto, and A. Haryono, “Effect of Fillers and Processing Parameters on the Shrinkage of Injected Molding Polyamide 66,” International Journal of Materials, Mechanics and Manufacturing, vol. 7, no. 4, pp. 165–169, Aug. 2019, doi: 10.18178/ijmmm.2019.7.4.452.
O. Ujianto, Marzuki, and F. A. Radini, “Natural rubber based compatibilizer prepared in twin screw extruder: Optimization percentage of grafted maleic anhydride using experimental design,” in Materials Science Forum, Trans Tech Publications Ltd, 2016, pp. 13–17. doi: 10.4028/www.scientific.net/MSF.864.13.
O. Ujianto, M. Jollands, and N. Kao, “Effect of Processing Variables on Tensile Modulus and Morphology of Polyethylene/Clay Nanocomposites Prepared in an Internal Mixer,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Mar. 2018. doi: 10.1088/1757-899X/319/1/012019.
Y. Zare, H. Garmabi, and F. Sharif, “Optimization of mechanical properties of PP/Nanoclay/CaCO3 ternary nanocomposite using response surface methodology,” J. Appl. Polym. Sci., vol. 122, no. 5, pp. 3188–3200, Dec. 2011, doi: 10.1002/app.34378.
K. M. Tsai and B. H. Tang, “Determination of injection molding process window based on form accuracy of lens using response surface methodology,” International Journal of Advanced Manufacturing Technology, vol. 75, no. 5–8, pp. 947–958, Oct. 2014, doi: 10.1007/s00170-014-6185-9.
A. Oushabi, S. Sair, F. Oudrhiri Hassani, Y. Abboud, O. Tanane, and A. El Bouari, “The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): Study of the interface of DPF–Polyurethane composite,” S. Afr. J. Chem. Eng., vol. 23, pp. 116–123, Jun. 2017, doi: 10.1016/j.sajce.2017.04.005.
R. Gnanadurai, T. Guadie, and S. Mesfin, “Study on the Mechanical Properties of Water Hyacinth Fiber Reinforced High Density Polyethylene Composite,” European Online Journal of Natural and Social Sciences, vol. 10, no. 3, pp. 379–390, 2021, [Online]. Available: http://www.european-science.com
DOI: https://doi.org/10.31284/j.jmesi.2026.v6i2.9299
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Published by:
Institut Teknologi Adhi Tama Surabaya, Indonesia
Editorial Address
Journal of Mechanical Engineering, Science, and Innovation is licensed under CC BY-NC 4.0






