Productivity Analysis of Digging, Loading, and Hauling Equipment in Overburden Removal Activities at PT. Anugrah Borneo Sinergy in Keramat Mina field, South Kalimantan, Indonesia

Muhammad Rusdi Taufiq, Fairus Atika Redanto Putri, Yazid Fanani

Abstract


This study evaluates the productivity of loading and hauling equipment at Anugrah Borneo Sinergy Ltd., explicitly focusing on compatibility between these units and identifying obstacles in overburdening material transfer activities. Employing a direct observation method at pit 1 in Keramat Mina Village, this research spanned a day shift from August 20 to September 20, 2022. Productivity measurements were taken for the Sany SY 365 H Excavator and the Hino 500 FM 260 JD Dump Truck, alongside employee interviews for supplementary data. Results indicate that the excavator's productivity varied daily, averaging 136.07 Bcm/hour, while the dump truck averaged 56.19 Bcm/hour over the same period, both below the target of 170 Bcm/hour. Initial compatibility assessment yielded a match factor of 0.83, which improved to 1.18 after optimizing cycle times. Simulating the compatibility with an additional hauler resulted in a perfect match factor of 1. Key obstacles included extended waiting and haul times, inefficiency, and an imbalance in the number of loaders versus haulers. Recommendations to enhance productivity involve optimizing loading efficiency and reducing haul, return and wait times. Post-optimization, productivity improved significantly, reaching 163.28 Bcm/hour for loaders and 88.29 Bcm/hour for haulers, thus meeting production goals. Adding another hauling unit could sustain these improvements by achieving optimal equipment compatibility.

Keywords


Cycle time, work efficiency, match factor, productivity

Full Text:

PDF

References


Anonim, "Komatsu Specification & Application Handbook," 28th ed., Japan, 2006; Anonim, "Caterpillar Performance Handbook," 38th ed., Illinois, U.S.A., 2008.

Y. Fanani, R. F. P. Syahanda, and A. F. Nahdliyin, "Kajian Teknis Kinerja Alat Muat Dan Alat Angkut Dalam Upaya Mencapai Sasaran Produksi Penambangan Batugamping Di Pt. United Tractors Semen Gresik Kabupaten Tuban Jawa Timur," in Prosiding Seminar Nasional Sains dan Teknologi Terapan, Oct. 2016, pp. 127–138.

E. R. Hadi, Inmarlinianto, and K. Gunawan, "Kajian Teknis Alat Muat dan Alat Angkut Untuk Mengoptimalkan Produksi Pengupasan Lapisan Tanah Penutup Di Pit UW PT Borneo Alam Semesta Kecamatan Jorong Kabupaten Tanah Laut Provinsi Kalimantan Selatan," Jurnal Teknologi Pertambangan, 2015.

E. R. Hadi, Inmarlinianto, and K. Gunawan, "Kajian Teknis Alat Muat dan Alat Angkut Untuk Mengoptimalkan Produksi Pengupasan Lapisan Tanah Penutup Di Pit UW PT Borneo Alam Semesta Kecamatan Jorong Kabupaten Tanah Laut Provinsi Kalimantan Selatan," Jurnal Teknologi Pertambangan, 2015.

Y. Indonesianto, "Pemindahan Tanah Mekanis," Jurusan Teknik Pertambangan, Universitas Pembangunan Nasional “Veteran,” Yogyakarta, 2008.

Y. Indonesianto, "Pemindahan Tanah Mekanis," Yogyakarta: CV. Awan Poetih, 2014.

A. Mustofa, Nurhakim, and S. Basuki, "Modul Praktikum Pemindahan Tanah Mekanis," Universitas Lambung Mangkurat, Banjarbaru, 2004.

Nurhakim, "Modul Ajar dan Praktikum Pemindahan Tanah Mekanis," FT UNLAM, Banjarbaru, 2004.

P. Partanto and Prodjosumarto, "Tambang Terbuka," Jurusan Teknik Pertambangan, ITB, Bandung, 1989.

R. L. Peurifoy, "Construction Planning, Equipment, and Methods," 7th ed., New York: McGraw-Hill, 2006.

F. A. R. Putri and E. Kriswandy, "Analisa Working Space Excavator Dan Off Highway Dump Truck Berdasarkan Spesifikasi Unit Dengan Menghitung Luas Aktual Kerja Excavator Sebagai Acuan Desain Pit Weekly Di Area Sm–A3 Pt. Sims Jaya Kaltim Site Pt. Kideco Jaya Agungkalimantan Timur," in Prosiding Seminar Nasional Sains dan Teknologi Terapan, Vol. 1, No. 1, Sep. 2020, pp. 115–120.

A. Susworo and Nurhakim, "Analisis Korelasi," Universitas Negeri Yogyakarta, Yogyakarta, 2004.

A. T. Tenriajeng, "Pemindahan Tanah Mekanis," Penerbit Gunadarma, Jakarta, 2003.

I. A. Kurniawan, "Kajian Teknis Produksi Alat Muat Dan Alat Angkut Untuk Memenuhi Sasaran Produksi Overburden Di PT. Batu Anugrah Mineral Resources, Kabupaten Kutai Kertanegara, Kalimantan Timur," Doctoral dissertation, Universitas Pembangunan Nasional "Veteran," Yogyakarta, 2018.

M. Gusman, Y. Asri, and I. Prengki, "Optimization of Digging and Loading Equipment and Hauling for Overburden Production with Quality Capacity Methods and Queing Methods in East Pit, August 2017 Period Pt. Artamulia Tata Pratama, Site Tanjung Belit, Bungo, Jambi," Journal of Physics: Conference Series, vol. 1387, 2019. Available: https://doi.org/10.1088/1742-6596/1387/1/012106.

R. Santoso, F. Suparno, and J. Irawan, "Productivity Evaluation of Digging, Loading, and Hauling Equipment in Limestone Mining, PT Pertama Mina Sutra Perkasa, Jember, Indonesia," Journal of Earth and Marine Technology (JEMT), 2024. Available: https://doi.org/10.31284/j.jemt.2024.v4i2.5561.

P. Lestari and A. Farist, "Analisis Produktivitas Alat Angkut dan Muat Pada Pengupasan Overburden di PT. XYZ Desa Batuah, Kutai Kartanegara, Kalimantan Timur," Jurnal Teknologi Sumberdaya Mineral (JENERAL), 2023. Available: https://doi.org/10.19184/jeneral.v4i2.43380.

U. Usman, Y. Fanani, and F. Widiatmoko, "Study of Productivity Analysis of Digging Loading in Gravel Mining in PT. Galuh Cempaka Districts Cempaka City Banjarbaru South Kalimantan Province," Journal of Earth and Marine Technology (JEMT), 2021. Available: https://doi.org/10.31284/j.jemt.2021.v2i1.2165.

K. Isnaeni, A. Pratama, and M. Malik, "Analisa Sinkronisasi Alat Gali Muat Dan Alat Angkut Terhadap Realisasi Produksi Overburden di PT Duta Alam Sumatera," Journal of Innovation Research and Knowledge, 2023. Available: https://doi.org/10.53625/jirk.v2i12.5673.




DOI: https://doi.org/10.31284/j.jemt.2024.v5i1.6426

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Muhammad Rusdi Taufiq, Fairus Atika Redanto Putri, Yazid Fanani

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.