Transient Response Performance Test on Aftermarket Motorcycle Rear Suspension in Indonesia

Desmas Arifianto Patriawan, Miftahul Ulum, M Sulton Alqoroni, Ahmad Yusuf Ismail

Abstract


Modification parts are found in Indonesia, one of which is suspension. This paper proves which after-market suspension has the best performance. These three suspensions were tested with a transient response with a test instrument that has an excitation height of 30 mm with a shaft rotational speed of 322 rpm. The observed responses are displacement and settling time. The test results without the addition of mass obtained a displacement of 25 mm for Aspira, 39 mm for AHM and 39 mm for Combiz. The addition of 30 kg mass resulted in 29 mm for Aspira, 38 mm for AHM and 23 mm for Combiz. Settling time without adding mass 1 s for Aspira and 1.2 s for AHM and 0.9 s for Combiz. With the addition of 30 kg mass obtained settling time of 1.3 s for Aspira, 1 s for AHM and 0.7 s for Combiz.

Full Text:

PDF

References


K. Wolford, “AMECA Automotive Wheel and Suspension Components Certification.” Automotive Manufacturers Equipment Compliance Agency, Inc., Sep. 11, 2019.

D. A. Patriawan, H. Irawan, A. Noerpamoengkas, B. Setyono, and A. Y. Ismail, “Definition, criteria and approaches in designing suspension system with active controls,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1010, p. 012006, Jan. 2021, doi: 10.1088/1757-899X/1010/1/012006.

B. L. J. Gysen, J. J. H. Paulides, J. L. G. Janssen, and E. A. Lomonova, “Active Electromagnetic Suspension System for Improved Vehicle Dynamics,” IEEE Trans. Veh. Technol., vol. 59, no. 3, pp. 1156–1163, Mar. 2010, doi: 10.1109/TVT.2009.2038706.

M. Omar, M. M. El-kassaby, and W. Abdelghaffar, “A universal suspension test rig for electrohydraulic active and passive automotive suspension system,” Alex. Eng. J., vol. 56, no. 4, pp. 359–370, Dec. 2017, doi: 10.1016/j.aej.2017.01.024.

B. Liu, L. Xu, Z. Zhao, M. A. A. Abdelkareem, J. Zou, and J. Yu, “Modeling and Simulation of a Displacement Controllable Active Suspension System,” in Volume 3: 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education, Quebec City, Quebec, Canada, Aug. 2018, p. V003T01A018. doi: 10.1115/DETC2018-85741.

E. Alvarez-Sánchez, “A Quarter-Car Suspension System: Car Body Mass Estimator and Sliding Mode Control,” Procedia Technol., vol. 7, pp. 208–214, 2013, doi: 10.1016/j.protcy.2013.04.026.

D. A. Patriawan, E. W. R. Widodo, and I. Hariyanto, “PEMODELAN SUSPENSI AKTIF DENGAN ELEKTROMAGNET UNTUK MENGHASILKAN KENYAMANAN DAN MANUVER YANG LEBIH BAIK DALAM BERKENDARA,” p. 6, 2015.

L. M. Jugulkar, S. Singh, and S. M. Sawant, “Analysis of suspension with variable stiffness and variable damping force for automotive applications,” Adv. Mech. Eng., vol. 8, no. 5, p. 168781401664863, May 2016, doi: 10.1177/1687814016648638.

M. Ö. Yatak and F. ?ahin, “Ride Comfort-Road Holding Trade-off Improvement of Full Vehicle Active Suspension System by Interval Type-2 Fuzzy Control,” Eng. Sci. Technol. Int. J., vol. 24, no. 1, pp. 259–270, Feb. 2021, doi: 10.1016/j.jestch.2020.10.006.

A. J. Nieto, A. L. Morales, J. M. Chicharro, and P. Pintado, “An adaptive pneumatic suspension system for improving ride comfort and handling,” J. Vib. Control, vol. 22, no. 6, pp. 1492–1503, Apr. 2016, doi: 10.1177/1077546314539717.

H. Qi, Y. Chen, N. Zhang, B. Zhang, D. Wang, and B. Tan, “Improvement of both handling stability and ride comfort of a vehicle via coupled hydraulically interconnected suspension and electronic controlled air spring,” Proc. Inst. Mech. Eng. Part J. Automob. Eng., vol. 234, no. 2–3, pp. 552–571, Feb. 2020, doi: 10.1177/0954407019856538.

B. Zhang, C. A. Tan, and T. Dai, “Ride comfort and energy dissipation of vehicle suspension system under non-stationary random road excitation,” J. Sound Vib., vol. 511, p. 116347, Oct. 2021, doi: 10.1016/j.jsv.2021.116347




DOI: https://doi.org/10.31284/j.jmesi.2021.v1i2.2297

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.