Online Submissions

Already have a Username/Password for Journal of Mechanical Engineering, Science, and Innovation?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.


Author Guidelines

Author Guidelines


  1. Reporting Standarts

The author must present an accurate article on the research conducted and present an objective discussion of the significance of the research. Research data must be presented accurately in the article. An article must be sufficiently detailed with sufficient references to enable others to replicate the work. Fraudulent or inaccurate presentation of papers is unethical behavior and is unacceptable.

  1. Data Access and Retention

Authors may be required to provide raw data for articles to be reviewed and must be able to provide public access to such data whenever possible, and must be able to retain such data for a reasonable period of time after publication.

  1. Originality and Plagiarism

Plagiarism in any form is unethical behavior in the publication of scientific work and is unacceptable. The author must ensure that all works presented are original works, and if the author has used the work and/or words of other people, the author must provide appropriate quotations. There are various forms of plagiarism, such as acknowledging someone else's writing as your own, copying or rewriting a substantial part of another person's work without citing the source, and claiming the results of research done by someone else. Self-plagiarism or auto plagiarism is a form of plagiarism. Auto plagiarism is quoting results or sentences from one's own published work without mentioning the source.

  1. Multiple, Redundant or Concurrent Publication

Authors may not publish the same manuscript in more than one journal. Submitting the same manuscript in more than one journal is unethical behavior in scientific publication and is unacceptable.

  1. Acknowledgement of Sources

Pengakuan dengan benar atas hasil karya orang lain harus selalu dilakukan. Penulis harus menyebutkan publikasi yang berpengaruh dalam penyusunan karyanya. Informasi yang diperoleh secara pribadi, seperti dalam percakapan, korespondensi, atau diskusi dengan pihak ketiga, tidak boleh digunakan atau dilaporkan tanpa izin tertulis dari sumber informasi tersebut.

  1. Authorship of the Paper

The author is a person who has made a significant contribution to the conception, design, execution or interpretation of the writing in the article. All parties who have made significant contributions are listed as co-authors. Corresponding authors must ensure that all co-authors have been included in the manuscript, and that all co-authors have read and approved the final version of the work and have approved the manuscript's submission for publication.

  1. Fundamental Errors in Published Works

When the author finds a significant error or inaccuracy in his published work, the author is obliged to immediately inform the editor of the journal or publisher and work with the editor to revoke or correct the paper.


Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Copyright Notice


Copyright aims to protect the specific way the article has been written to describe an experiment and the results. Journal of Mechanical Engineering, Science, and Innovation is committed to its authors to protect and defend their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. Journal of Mechanical Engineering, Science, and Innovation is published under the terms of the Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain copyright and grant the journal right of first publication (online and print) with the work simultaneously. We use the restrictive license (non-commercial) as follows:
BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgment of its initial publication in this journal.
NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant Journal of Mechanical Engineering, Science, and Innovation explicit the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.

Below you may find the full text of the license signed by authors.


1. License to Publish

The non-commercial use of the article will be governed by the Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). The author hereby grants Journal of Mechanical Engineering, Science, and Innovation an exclusive publishing and distribution license in the manuscript include tables, illustrations or other material submitted for publication as part of the manuscript (the “Article”) in print, electronic and all other media (whether now known or later developed), in any form, in all languages, throughout the world, for the full term of copyright, and the right to license others to do the same, effective when the article is accepted for publication. This license includes the right to enforce the rights granted hereunder against third parties.

2. Author’s Warranties

The author warrants that the article is original, written by stated author/s, has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

Under the Creative Commons Attribution-Non Commercial 4.0 International (CC BY-NC 4.0) license, the author(s) and users are free to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material). Users must give appropriate credit, provide a link to the license, and indicate if changes were made.

4. Rights of Authors

 Authors retain the following rights:
  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in future own works, including lectures and books,
  • The right to reproduce the article for own purposes, provided the copies are not offered for sale, and
  • The right to self-archive the article.

5. Co-Authorship

If the article was prepared jointly with other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.

6. Royalties

This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by Journal of Mechanical Engineering, Science, and Innovation or its sublicensee.

7. Miscellaneous

Journal of Mechanical Engineering, Science, and Innovation will publish the article (or have it published) in the Journal if the article’s editorial process is successfully completed and Journal of Mechanical Engineering, Science, and Innovation or its sublicensee has become obligated to have the article published. Journal of Mechanical Engineering, Science, and Innovation may conform the article to a style of punctuation, spelling, capitalization, and usage that it deems appropriate.


Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.


Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (IDR)

Article Publication: 0.00 (IDR)

The author will get the full PDFs, for articles that are published successfully.