Comparative Structural Performance Evaluation of Modified Stopper Mounting Designs in Conveyor Systems Using Finite Element Simulation

Maulidia Hendriani, Andoko Andoko, Riduwan Prasetya, Yahya Zakaria

Abstract


This study investigates the structural performance of three stopper mounting designs for conveyor systems using finite element simulations in ANSYS Workbench. The analysis was conducted using a static structural method, where a vertical downward load of 103.43 N converted from the total weight of the stopper was applied to the structure, and fixed support boundary conditions were assigned at the mounting base. We compared the original design with two modified versions, including one reinforced with stiffening ribs. We evaluated each model under static loads by measuring total deformation, equivalent stress, elastic strain, and safety factor. Compared to the original design, MD 1 reduced total deformation by 88.42%, elastic strain by 53.04%, and equivalent stress by 30.72%, while increasing the safety factor by 0.94%. These improvements were achieved without significantly increasing material usage. The addition of stiffening ribs effectively directed internal forces, stabilized stress zones, and enhanced structural resilience. The original design, while functional, exhibited high deformation and uneven stress distribution that limited its suitability for precision-dependent operations. Reinforcing the geometry proved essential in achieving better mechanical performance and durability. This validates the use of local structural enhancement as a key strategy in mechanical design. The findings contribute to automation system development by highlighting the importance of local reinforcement in precision-oriented automation components.


Full Text:

PDF

References


A. N. Ciucu-Durnoi, C. Delcea, A. Stănescu, et al., “Beyond Industry 4.0: Tracing the Path to Industry 5.0 through Bibliometric Analysis,” Sustainability (Switzerland), vol. 16, no. 12, 2024, doi: 10.3390/su16125251.

W. Kraus and T. Bauernhansl, “How Automation Will Change the Future of Production; [Wie Automatisierung die Zukunft der Produktion verändern wird Einordnung und Nutzen für produzierende Unternehmen],” ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, vol. 116, no. 10, pp. 652 – 656, 2021, doi: 10.1515/zwf-2021-0165.

K. Chirumalla, H. Ali Jalil, and M. Behnam, “Navigating Production Automation as a Service: Unveiling Drivers, Benefits, and Challenges in Manufacturing Companies,” in Advances in Transdisciplinary Engineering, J. Andersson, S. Joshi, L. Malmskold, and F. Hanning, Eds., IOS Press BV, 2024, pp. 206–218. doi: 10.3233/ATDE240166.

M. A. Potirniche and G. F. Capatana, “STUDY OF THE BEHAVIOUR FOR THE WORK EQUIPMENT OF A FORKLIFT DURING THE WORKING PROCESS USING FINITE ELEMENT ANALYSIS,” International Journal of Modern Manufacturing Technologies, vol. 14, no. 3, pp. 219–226, 2022, doi: 10.54684/ijmmt.2022.14.3.219.

A. L. Zolkin, T. G. Aygumov, A. I. Adzhieva, et al., “Analysis of the integration of robotic automation in production,” in AIP Conference Proceedings, I. Kovalev and A. Voroshilova, Eds., American Institute of Physics, 2024. doi: 10.1063/5.0199949.

M. Sedore, “Automation in optical manufacturing: beveling and part handling,” in Proceedings of SPIE - The International Society for Optical Engineering, J. D. G. Nelson and B. Unger, Eds., SPIE, 2023. doi: 10.1117/12.2684720.

M. Sedore, “Applications of automation in optical manufacturing process chain: Grinding, polishing, and metrology,” in Proceedings of SPIE - The International Society for Optical Engineering, J. D. Nelson and B. L. Unger, Eds., SPIE, 2021. doi: 10.1117/12.2602846.

A. T. Ramadan, O. A. Alamri, and A. H. Tolba, “Reliability Assessment of Bridge Structure Using Bilal Distribution,” Mathematics, vol. 12, no. 10, 2024, doi: 10.3390/math12101587.

Z. Dogruyol and S. Güner, “Examining the impact of product variety on design, supply, and production processes using system dynamics approach,” Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 36, no. 3, pp. 1185–1198, 2021, doi: 10.17341/gazimmfd.731788.

A. E. Baladeh and S. Taghipour, “Dynamic multilevel redundancy allocation optimization under uncertainty,” in Proceedings - Annual Reliability and Maintainability Symposium, Institute of Electrical and Electronics Engineers Inc., 2023. doi: 10.1109/RAMS51473.2023.10088213.

Nuroji, “Analysis of Reinforced Concrete Capacity for Irregular Cross-Sections Using Numerical Methods,” in Lecture Notes in Civil Engineering, S. A. Kristiawan, B. S. Gan, M. Shahin, and A. Sharma, Eds., Springer Science and Business Media Deutschland GmbH, 2023, pp. 57–68. doi: 10.1007/978-981-16-9348-9_6.

D. Zheng, “Design of Static Strength Analysis Software for Conveyor Head Tripod Based on ANSYS and MATLAB,” in Advances in Transdisciplinary Engineering, C. C.-H., A. Scapellato, A. Barbiero, and D. G. Korzun, Eds., IOS Press BV, 2023, pp. 494–500. doi: 10.3233/ATDE230988.

G. Fruet and L. Fleck Fadel Miguel, “Proposal of a methodology for mass optimization of realistic steel structural systems composed of columns and galleries for support of solid bulk conveyors,” Structures, vol. 53, pp. 833–847, 2023, doi: 10.1016/j.istruc.2023.04.119.

C. A. Wheeler , P. W. Robinson, P. J. Munzenberger et al., “Belt Conveyor Design and Troubleshooting,” in Simulations in Bulk Solids Handling: Applications of DEM and other Methods, wiley, 2023, pp. 79–105. doi: 10.1002/9783527835935.ch3.

Т. М. Lenkovskyi, Y. L. Ivanytskyi, Y. V. Molkov et al., “Analysis of the Stress-Strain State of a Bridgman Specimen in Axial Tension by the Finite-Element Method,” Materials Science, vol. 56, no. 5, pp. 722–726, 2021, doi: 10.1007/s11003-021-00488-4.

P. Duranton, M. Bernion, A. Amzil, et al., “STRESS CLASSIFICATION PLANE CALCULATION AND VALIDATION,” in International Conference on Nuclear Engineering, Proceedings, ICONE, American Society of Mechanical Engineers (ASME), 2023. [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85178518540&partnerID=40&md5=b199f9927db212185b765bd3728692f0

M. Zubair, K. Singh, and A. K. Sehgal, “The Significance of Virtual Prototyping in reducing design risk and Accelerating Product Innovation,” in 2023 14th International Conference on Computing Communication and Networking Technologies, ICCCNT 2023, Institute of Electrical and Electronics Engineers Inc., 2023. doi: 10.1109/ICCCNT56998.2023.10306407.

S. Pandey, N. K. Thakur, P. Nath, et al., “Optimizing Wind Load Performance through Shape Modifications and Corner Configurations in High-Rise Buildings: A Computational Fluid Dynamics Study,” Journal of The Institution of Engineers (India): Series A, vol. 106, no. 2, pp. 631–648, 2025, doi: 10.1007/s40030-025-00884-y.

Y. Li, X. Zhao, S. Liu, et al., “Review and Prospects of Numerical Simulation Research on Internal Flow and Performance Optimization of Twin-Screw Compressors,” Energies (Basel)., vol. 18, no. 10, 2025, doi: 10.3390/en18102608.

D. Koulocheris and C. Vossou, “Exploration of equivalent design approaches for tanks transporting flammable liquids,” Computation, vol. 8, no. 2, Jun. 2020, doi: 10.3390/COMPUTATION8020033.

W. D. Callister, Materials Science and Engineering, 10th ed. United States of America: Wiley, 2018.

L. Vieira, R. Gonçalves, D. Camotim, et al., “Generalized Beam Theory deformation modes for steel–concrete composite bridge decks including shear connection flexibility,” Thin-Walled Structures, vol. 169, 2021, doi: 10.1016/j.tws.2021.108408.

K. Nalepka et al., “Ribs of Pinna nobilis shell induce unexpected microstructural changes that provide unique mechanical properties,” Materials Science and Engineering: A, vol. 829, 2022, doi: 10.1016/j.msea.2021.142163.

E. Putilova and K. Kryucheva, “Influence of Elastic–Plastic Deformation on the Structure and Magnetic Characteristics of 13Cr-V Alloyed Steel Pipe,” Symmetry (Basel)., vol. 14, no. 6, 2022, doi: 10.3390/sym14061201.

E. J. Sippel and H. B. Blum, “Structural analysis of steel structures with non-symmetric members,” Eng. Struct., vol. 245, 2021, doi: 10.1016/j.engstruct.2021.112739.

N. A. Makhutov, “Analyzing Stress and Strain Concentration in the Inelastic Region for Strengthening and Softening Materials,” Journal of Machinery Manufacture and Reliability, vol. 53, no. 2, pp. 107–113, 2024, doi: 10.1134/S1052618824020109.

T. Leutbecher and J. Schuller, “Axial and f lexural tensile strength of thin members made of ultra-high-performance concrete; [Zug- und Biegezugfestigkeit dunner Tragelemente aus ultrahochfestem Beton],” Betonwerk und Fertigteil-Technik/Concrete Plant and Precast Technology, vol. 91, no. 3, p. 88, 2025, [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-105004462113&partnerID=40&md5=e20bcd6e8f86721030620a526b7dd002

A. M. Legese, A. Różański, M. Sobótka, et al., “Numerical analysis of soil–steel composite structure performance at ultimate load: impact of stiffening ribs and geotextile reinforcement,” Archives of Civil and Mechanical Engineering, vol. 24, no. 3, 2024, doi: 10.1007/s43452-024-00986-7.

I. Mat Samudin, N. A. Mohd Radzuan, A. B. Sulong, et al., “Stress strain curve analysis of sheet based TPMS structures in quasi static compression test: A review,” Journal of Materials Research and Technology, vol. 36, pp. 5757–5796, May 2025, doi: 10.1016/j.jmrt.2025.04.168.

Z. Shi, X. Xie, H. Zeng, et al., “Disaster mechanism of large-diameter shield tunnel segments under multi-source load coupling: A case study,” Eng. Fail. Anal., vol. 166, 2024, doi: 10.1016/j.engfailanal.2024.108878.

M. Lisyatnikov, S. Roshchina, V. Martynov, et al., “Determination of Local Stresses in Places Where the Stiffness of Reinforced Wooden Beams Changes,” in Lecture Notes in Civil Engineering, N. Vatin, S. Roshchina, and D. Serdjuks, Eds., Springer Science and Business Media Deutschland GmbH, 2024, pp. 235–247. doi: 10.1007/978-3-031-30570-2_21.

M. Shendy, M. Alkhader, and B. A. Abu-Nabah, “Stress Concentration Induced by Synnergisticaly Interacting Geometric Discontinuites,” in 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022, Institute of Electrical and Electronics Engineers Inc., 2022. doi: 10.1109/ASET53988.2022.9735055.

V. H. Pardosi, S. Nugroho, and G. D. Haryadi, “ANALISIS KEGAGALAN VALVE IN (KATUP MASUK) PADA MOTOR KAPASITAS 155 CC,” 2024.

M. Amjad, S. Badshah, S. Ahmad et al., “Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios,” PLoS One, vol. 19, no. 8 August, Aug. 2024, doi: 10.1371/journal.pone.0300270.

Y. G. Matvienko, “A Simplified Probabilistic Approach to Estimating the Safety Factors of Crack Resistance,” Journal of Machinery Manufacture and Reliability, vol. 50, no. 3, pp. 200–207, 2021, doi: 10.3103/S1052618821030092.

D. Pontan, MANAJEMEN PROYEK KONSTRUKSI, 1st ed. Medan: PT Media Penerbit Indonesia, 2024.

A. Arwani, INDUSTRI 4.0 BAGAIMANA MEREVOLUSI BISNIS ANDA, 1st ed. Medan: PT Media Penerbit Indonesia, 2024.

C. Kant and G. A. Harmain, “Fatigue Life Prediction Under Interspersed Overload in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models-A Comparative Study,” in Lecture Notes in Mechanical Engineering, A. W. M, Ed., Springer Science and Business Media Deutschland GmbH, 2022, pp. 253–260. doi: 10.1007/978-981-16-8810-2_18.

A. M. Legese, A. Różański, M. Sobótka, et al., “Numerical analysis of soil–steel composite structure performance at ultimate load: impact of stiffening ribs and geotextile reinforcement,” Archives of Civil and Mechanical Engineering, vol. 24, no. 3, 2024, doi: 10.1007/s43452-024-00986-7.

X. Han, B. Han, Y. He, et al., “An Investigation into the Impact of Time-Varying Non-Conservative Loads on the Seismic Stability of Concrete-Filled Steel-Tube Arch Bridges,” Buildings, vol. 14, no. 9, 2024, doi: 10.3390/buildings14092739.

S. M. Harle, “Analyzing the Response of Structural Members to Impact Loads Using Finite Element Analysis: A Review,” Current Materials Science, vol. 18, no. 1, pp. 53–75, 2025, doi: 10.2174/0126661454263264230926054553.




DOI: https://doi.org/10.31284/j.jmesi.2026.v6i1.8501

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Published by:
Institut Teknologi Adhi Tama Surabaya, Indonesia

Editorial Address
Journal of Mechanical Engineering, Science, and Innovation is licensed under CC BY-NC 4.0