Characteristics of Char and Tar from the Pyrolysis Process of Brem Waste with Temperature Variations Using a Rotary Kiln System

Farid Majedi, Anatasya Bella Dwi Harito, Fathonah Githa Setya Ningrum, Muhammad Ibadurrochim, Muhammad Arijal Fathurrohman Fauzi, Limade Gie Inel, Karine Efrida Rosy, Dery Anton Daniswari

Abstract


One of the processes to obtain new renewable fuels is pyrolysis. This process produces alternative fuels, namely Char (charcoal), tar (bio-oil) and gas. Tar (bio-oil) can be processed into biodiesel. Pyrolysis is the process of breaking down (decomposing) biomass through a heating process with little or no oxygen. Research Pyrolysis of Rotary Kiln System with Brem, Plastic and Durian Peel Waste Biomass on Char and Tar Characteristics. This research was carried out by directly testing the pyrolysis of a rotary kiln system with brem, plastic and durian peel waste biomass. The test parameters use temperature variations of 523K, 573K, 673K, 773K, and 873K. Testing for each biomass is carried out separately, not mixed. The aim of the research is to determine the characteristics of char and tar from each biomass including calorific value, mass, volume and density. Research results the highest char calorific value is 11181.1 cal / gram with plastic waste biomass. The highest calorific value was obtained from tar from plastic waste, which was 14211.3 cal/gram. The highest density value was between 0.9-0.93 grams/ml in biomass from brem waste, plastic waste, durian skin waste.


Full Text:

PDF

References


D. Sugiyanto, “Pengaruh Variasi Jenis Busi Dan Campuran Bensin Methanol Terhadap Kinerja Motor 4 Tak,” Sainstech Politek. Indonusa Surakarta, vol. 1, p. 8, 2014.

F. Majedi, A. C. Arifin, B. Asngali, and H. Wahyu Barkhawa, “Tar Kinetic Parameters of Pyrolysis Processes of Brem, Plastic, and Durian Skin Waste with Temperature Variations on A Rotary Kiln,” J. Phys. Conf. Ser., vol. 1845, no. 1, 2021, doi: 10.1088/1742-6596/1845/1/012001.

F. Majedi, W. Wijayanti, and N. Hamidi, “Perubahan Massa dan Nilai Kalor Char dengan Variasi Heating Rate dan Temperatur pada Pirolisis Serbuk Kayu Mahoni ( SWITENIA ),” J. ROTOR, vol. 9, no. November, pp. 59–64, 2016.

J. Akhtar and N. Saidina Amin, “A review on operating parameters for optimum liquid oil yield in biomass pyrolysis,” Renew. Sustain. Energy Rev., vol. 16, no. 7, pp. 5101–5109, 2012, doi: 10.1016/j.rser.2012.05.033.

D. Candra Kumara, W. Wijayanti, and D. Widhiyanuriyawan, “Pengaruh Penggunaan Katalis (Zeolit) Terhadap Kinetic Rate Tar Hasil Pirolisis Serbuk Kayu Mahoni (Switenia Macrophylla),” J. Rekayasa Mesin, vol. 6, no. 1, pp. 19–25, 2015, doi: 10.21776/ub.jrm.2015.006.01.3.

A. V. Bridgwater, “Review of fast pyrolysis of biomass and product upgrading,” Biomass and Bioenergy, vol. 38, pp. 68–94, 2012, doi: 10.1016/j.biombioe.2011.01.048.

W. N. R. W. Isahak, M. W. M. Hisham, M. A. Yarmo, and T. Y. Yun Hin, “A review on bio-oil production from biomass by using pyrolysis method,” Renew. Sustain. Energy Rev., vol. 16, no. 8, pp. 5910–5923, 2012, doi: 10.1016/j.rser.2012.05.039.

A. Nugroho, W. Wijayanti, and M. N. Sasongko, “Pengaruh Temperatur terhadap Laju Reaksi Tar Hasil Pirolisis Serbuk Kayu Mahoni pada Rotary Kiln,” J. Rekayasa Mesin, vol. 10, no. 2, pp. 113–120, 2019, doi: 10.21776/ub.jrm.2019.010.02.2.

W. Wijayanti and M. Sasongko, “Reduksi Volume Dan Pengarangan Kotoran Sapi Dengan Metode Pirolisis,” Rekayasa Mesin, vol. 3, no. 3, pp. 4040–410, 2012.

F. Majedi, W. Wijayanti, and N. Hamidi, “Parameter Kinetik Char Hasil Pirolisis Serbuk Kayu Mahoni (Switenia Macrophylla) dengan Variasi Heating Rate dan 1 Temperatur,” J. Rekayasa Mesin, vol. 6, no. 1, pp. 1–7, 2015, doi: 10.21776/ub.jrm.2015.006.01.1.

A. T. Yuliansyah, A. Prasetya, A. A. R. Muhammad, and R. Laksono, “Pyrolysis of plastic waste to produce pyrolytic oil as an alternative fuel,” Int. J. Technol., vol. 6, no. 7, pp. 1076–1083, 2015, doi: 10.14716/ijtech.v6i7.1241.

B. Chiwara, E. Makhura, G. Danha, S. Bhero, E. Muzenda, and P. Agachi, “Pyrolysis of Plastic Waste Into Fuel and Other Products,” 16th Int. Waste Manag. Landfill Symp., no. October, 2017.

A. Saxena, H. Sharma, and G. Rathi, “Conversion of Waste Plastic to Fuel: Pyrolysis-An Efficient Method: A Review,” no. February 2017, pp. 3–7, 2017, [Online]. Available: https://www.researchgate.net/publication/313349450

A. K. Awasthi, S. Majumder, M. E. Abdullah, and N. Asyiqin, “Pyrolysis of plastic waste for liquid fuel production as prospective energy resource Pyrolysis of plastic waste for liquid fuel production as prospective energy resource,” 2018, doi: 10.1088/1757-899X/334/1/012001.

E. Munarwan and F. Majedi, “Karakteristik Bio-Oil Hasil Pirolisis Limbah Brem Dengan Variasi Temperatur,” JTT (Jurnal Teknol. Terpadu), vol. 7, no. 1, pp. 23–28, 2019, doi: 10.32487/jtt.v7i1.552.

J. E. White, W. J. Catallo, and B. L. Legendre, “Biomass pyrolysis kinetics: A comparative critical review with relevant agricultural residue case studies,” J. Anal. Appl. Pyrolysis, vol. 91, no. 1, pp. 1–33, 2011, doi: 10.1016/j.jaap.2011.01.004.

L. C. Morais, A. A. D. Maia, M. E. G. Guandique, and A. H. Rosa, “Pyrolysis and combustion of sugarcane bagasse,” J. Therm. Anal. Calorim., vol. 129, no. 3, pp. 1813–1822, 2017, doi: 10.1007/s10973-017-6329-x.

N. M. Noor and C. Abdullah, “Self-Purging Pyrolysis of Sugarcane Bagasse biomass to disor-dered microporous Biochar production,” Int. J. Eng. Technol., vol. 7, pp. 1680–1682, 2018, [Online]. Available: www.sciencepubco.com/index.php/IJET

W. Nuriana, N. Anisa, and Martana, “Synthesis preliminary studies durian peel bio briquettes as an alternative fuels,” Energy Procedia, vol. 47, pp. 295–302, 2014, doi: 10.1016/j.egypro.2014.01.228.

M. Syahri, T. Marnoto, C. D. N, and D. Prasetyo, “Pembuatan Biobriket dari Limbah Organik,” no. 2, pp. 1–7, 2015.

A. A. Salema and F. N. Ani, “Pyrolysis of oil palm empty fruit bunch biomass pellets using multimode microwave irradiation,” Bioresour. Technol., vol. 125, pp. 102–107, 2012, doi: 10.1016/j.biortech.2012.08.002.

E. Sari, U. Khatab, and E. D. Rahman, “Performance Evaluation of Rotary Carbonization Pyrolysis as Durian Shell Biobriquettes Raw Materials,” vol. 4, no. 5, pp. 108–112, 2018.

I. Qiram, D. Widhiyanuriyawan, and W. Wijayanti, “Pengaruh Variasi Temperatur Terhadap Kuantitas Char Hasil Pirolisis Serbuk Kayu Mahoni (Switenia Macrophylla) Pada Rotary 39 Kiln,” J. Rekayasa Mesin, vol. 6, no. 1, pp. 39–44, 2015, doi: 10.21776/ub.jrm.2015.006.01.6.

M. Syamsiro, M. S. Dwicahyo, Y. Sulistiawati, M. Ridwan, and N. Citrasari, “Development of a rotary kiln reactor for pyrolytic oil production from waste tire in Indonesia,” IOP Conf. Ser. Earth Environ. Sci., vol. 245, no. 1, 2019, doi: 10.1088/1755-1315/245/1/012044.

A. M. Li et al., “Pyrolysis of solid waste in a rotary kiln: Influence of final pyrolysis temperature on the pyrolysis products,” J. Anal. Appl. Pyrolysis, vol. 50, no. 2, pp. 149–162, 1999, doi: 10.1016/S0165-2370(99)00025-X.

R. Purwasih, “Pemanfaatan Limbah Pabrik Brem Sebagai Bahan Baku Bioetanol Untuk Bahan Bakar Alternatif Pemanfaatan Limbah Pabrik Brem Sebagai Bahan Baku Bioetanol Untuk Bahan Bakar Alternatif,” J. Pendidik. Tek. Mesin UNESA, vol. 6, no. 02, p. 251240, 2017.

H. Herliati, S. B. Prasetyo, and Y. Verinaldy, “Review: Potensi limbah Plastik dan Biomassa sebagai Sumber Energi Terbarukan Dengan Proses Pirolisis,” J. Teknol., vol. 6, no. 2, pp. 85–98, 2019, doi: 10.31479/jtek.v6i2.13.

Rahmatullah, Rizka Wulandari Putri, and Enggal Nurisman, “Produksi bio-oil dari limbah kulit durian dengan proses pirolisis lambat,” J. Tek. Kim., vol. 25, no. 2, pp. 50–53, 2019, doi: 10.36706/jtk.v25i2.425.

D. L. Jones, J. Rousk, G. Edwards-Jones, T. H. DeLuca, and D. V. Murphy, “Biochar-mediated changes in soil quality and plant growth in a three year field trial,” Soil Biol. Biochem., vol. 45, pp. 113–124, 2012, doi: 10.1016/j.soilbio.2011.10.012.

M. Masturi, S. Effendy, A. Gelu, H. Hammam, and F. Fianti, “Analysis of the Mechanical Properties Brake Canvas With Basic Ingredients of the Durian Fruit Skin and Teak Leaves,” J. Bahan Alam Terbarukan, vol. 7, no. 2, pp. 149–155, 2018, doi: 10.15294/jbat.v7i2.15019.

K. Ridhuan and J. Suranto, “Perbandingan Pembakaran Pirolisis Dan Karbonisasi Pada Biomassa Kulit Durian Terhadap Nilai Kalori,” Turbo J. Progr. Stud. Tek. Mesin, vol. 5, no. 1, pp. 50–56, 2017, doi: 10.24127/trb.v5i1.119.

F. Majedi, F. Susanto, and E. Munarwan, “Perubahan kuantitas dan nilai kalor char dengan variasi temperatur pada pirolisis limbah brem,” J. Teknol., vol. 11, no. 2, pp. 91–96, 2019.

K. Nabawiyah, A. Abtokhi, and J. Fisika, “Penentuan Nilai Kalor Dengan Bahan Bakar Kayu Sesudah Pengarangan Serta Hubungannya Dengan Nilai Porositas Zat Padat,” J. Neutrino, vol. 0, no. 0, pp. 44–55, 2012, doi: 10.18860/neu.v0i0.1625.

R. Salim, “Karakteristik dan Mutu Arang Kayu Jati (Tectona grandis) dengan Sistem Pengarangan Campuran pada Metode Tungku Drum (The Quality and Characteristics of Teak (Tectona grandis) Charcoal Made by Mixed Carbonisation in Drum Kiln),” J. Ris. Ind. Has. Hutan, vol. 8, no. 2, pp. 53–64, 2016, doi: 10.24111/jrihh.v8i2.2113.

Y. Bow, Zulkarnain, S. P. Lestari, S. R. M. Sihombing, S. A. Kharissa, and Y. A. Salam, “Pengolahan Sampah Low denstity polypropylene (PP) Menjadi Bahan Bakar Cair Alternatif menggunakan Prototipe Pirolisis Thermal Cracking,” J. Politek. Negeri Sriwij. Kinet., vol. 9, no. 03, pp. 1–6, 2018.

R. Gunawan, S. Daud, and E. Yenie, “Pengaruh Suhu dan Variasi Rasio Plastik Jenis Polypropylene dan Plastik Polytyrene terhadap Yield dengan proses Pirolisis,” Jom FTEKNIK, vol. 4, no. 2, pp. 1–6, 2017.

K. Endang, G. Mukhtar, Abed Nego, and F. X. A. Sugiyana, “Pengolahan Sampah Plastik dengan Metoda Pirolisis menjadi Bahan Bakar Minyak,” Pengemb. Teknol. Kim. untuk Pengolah. Sumber Daya Alam Indones., vol. ISSN 1693-, pp. 1–7, 2016.




DOI: https://doi.org/10.31284/j.jmesi.2025.v5i1.6558

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Published by:
Mechanical Engineering Department - Institut Teknologi Adhi Tama Surabaya

Editorial Address
Journal of Mechanical Engineering, Science, and Innovation is licensed under CC BY-NC 4.0