PENERAPAN K3 DENGAN METODE HIRARC (HAZARD INDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL) PADA KONTRUKSI DRAINASE U-DITCH PROYEK TOL (STUDI KASUS : PT. RST)

Saifullah Saiful

Abstract

PT. RST is a company engaged in the construction sector. Currently, PT. RST is participating in the construction of toll road projects. Toll road infrastructure requires water channels to maintain road quality so that it is not damaged by rainwater puddles. U-ditch drainage is used as a solution to overcome water puddles (Gustomi et al., 2023). However, the process of making u-ditch drainage requires careful preparation to prevent or minimize work accidents, because this work is categorized as high-risk work. Therefore, this study uses the Hazard Identification, Risk Assessment and Risk Control method, hereinafter referred to as HIRARC, which aims to identify potential hazards, conduct risk assessments and analyses, and determine risk control (Juraman & Beatrix, 2020) using interview methods, observations, literature studies and questionnaires.

The results of the study showed that there were 38 potential hazards at the work site, the impacts that occurred included minor injuries, physical injuries, fatigue, ARI due to exposure to dust and chemicals, as well as the risk of failure to lift materials and overturning heavy equipment. Risk analysis is conducted by assessing the severity and likelihood, which are then categorized into low, medium, or high risk levels. From the analysis results, 11 potential hazards were found to be in the moderate risk category, 19 potential hazards in the high category, and 8 potential hazards in the extreme category. To reduce the risk level, this study predominantly recommends engineering control, administrative control, and personal protective equipment (PPE).

Keywords : HIRARC, occupational safety, risk assessment, hazard control

Full Text:

PDF

References

Gustomi, M. L., Taufiq, M., & Khamid, A. (2023). Perbandingan Waktu dan Biaya Pelaksanaan Drainase Konvensional Pasangan Batu Kali dengan Beton Pracetak U-Ditch (Studi Kasus di Desa Karanganyar Kecamatan Pagerbarang Kabupaten Tegal). 1(1).

Juraman, M. F. T., & Beatrix, M. (2020). Identifikasi Resiko Kecelakaan Kerja Menggunakan Metode Hirarc (Studi Kasus: Proyek Preservasi Jalan Rigid Pavement Babat—Lamongan— Gresik). 5(2).

Ridwan, A., & Prihastono, E. (2022). Pengaruh Keselamatan dan Kesehatan Kerja (K3) Terhadap Kenyamanan Kerja Karyawan dengan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) (Studi kasus di PT. Dupantex Pekalongan). 20(1).

Susanto, A., Usman, U., Yuliasari, F. S., Wiryanta, W., Budi, S. C., Pane, Y., & Prasetio, D.

B. (2024). Identifikasi Bahaya, Penilaian Risiko dan Penentuan Pengendalian Pada Operasi Pertambangan: Systematic Literature Review Hazard Identification, Risk Assessment and Risk Control in Mining Operation: Systematic Literature Review.

Wagola, E. S., Muharyanto, E. A., Sudarman, A., Rumbia, N., & Konong, I. (2020). Komparasi Kapasitas Lentur Saluran Drainase Beton Pracetak (U-DITCH) Tipe Normal dan Inovasi. Journal of Science and Technology, 1.

Wahid, A., Munir, M., & Hidayatulloh, A. R. (2020). Analisis Resiko Kecelakaan Kerja Menggunakan Metode HIRARC PT. SPI. Journal of Industrial View, 2(2), 45–52. https://doi.org/10.26905/4880

DOI: https://doi.org/10.31284/j.senopati.2026.v7i2.7879

Refbacks

  • There are currently no refbacks.