Analisa dan Perbaikan Waktu Set-up Pergantian Cetakan dengan Metode Single-Minute Exchange of Dies (SMED) (Studi Kasus: PT. XYZ)
Abstract
Full Text:
PDFReferences
J. P. Womack and D. T. Jones, “Lean Thinking—Banish Waste and Create Wealth in your Corporation,” J. Oper. Res. Soc., vol. 48, no. 11, pp. 1148–1148, Dec. 1997, doi: 10.1038/sj.jors.2600967.
S. ram Bavuluri, “Set up time Reduction and Quality Improvement on the Shop floor using different lean and quality tools,” All Theses, May 2012, Accessed: Jan. 04, 2021. [Online]. Available: https://tigerprints.clemson.edu/all_theses/1306.
I. Artikel, “Jurnal SENOPATI,” pp. 41–49, 2019.
Lukmandono, R. Prabowo, and E. Sulistyowati, “Analysis of Total Productive Maintenance (TPM) and Failure Mode and Effect Analysis (FMEA) to improve machine effectiveness: A study on Indonesia’s sugar mills,” IOP Conf. Ser. Mater. Sci. Eng., vol. 885, no. 1, 2020, doi: 10.1088/1757-899X/885/1/012063.
R. Prabowo, “Tibuana Journal of applied Industrial Engineering-University of PGRI Adi Buana p- ISSN 2622-2027 INTEGRATION OF LEAN AND GREEN MANUFACTURING TO SUSTAINABILITY IMPROVING AT PT . TEXTILE JAYA GEMILANG Tibuana Journal of applied Industrial Engineering-Univer,” vol. 2, no. 2, 2019.
Feby Nurhadiyanto and Z. F. Ikatrinasari, “Perbaikan waktu,” vol. 6, no. 1, pp. 1–8, 2006.
R. Soesilo, M. Basuki, and M. J. Hidayat, “Minimasi Waktu Penggantian Cetakan Dengan Pendekatan Lean Manufacture & Single Minute Exchange of Dies ( Smed),” Simp. Nas. RAPI XVII, vol. 1, pp. 89–96, 2018.
Refbacks
- There are currently no refbacks.