DC Motor Speed ​​Control with Potentiometer based on Arduino Uno

Maman Rukmana

Abstract

DC motor speed regulation is easy to do in various speeds and load variations, so it is widely used in automatic control systems. To implement knowledge in the Electrical Machine Control course, in this experiment a DC motor speed regulation was carried out with a potentiometer connected to the Arduino Uno. This experiment consists of 4 stages, namely design, testing, installation and commissioning. The design stage is to design the Proteus circuit and program the Arduino IDE. The results of the design are tested with the testing phase. Once successful, the installation stage is carried out. The results of the installation were tested with the commissioning stage with 12 trials where the value of the potentiometer was different. From the experimental results, obtained a relationship between the value of the potentiometer and the speed of the DC motor. The potentiometer value is inversely proportional to the speed of the DC motor.

Keywords

Arduino Uno; DC motor; potensiometer; speed control

Full Text:

PDF

References

M. Asbi, S. Subiyanto, and Y. Primadiyono, “Simulasi Kendali Motor DC Penguat Terpisah Menggunakan Kendali Fuzzy-FOPID,” Jetri J. Ilm. Tek. Elektro, vol. 17, no. 1, p. 99, Aug. 2019, doi: 10.25105/jetri.v17i1.4109.

R. Birdayansyah, N. Sudjarwanto, and O. Zebua, “Pengendalian Kecepatan Motor DC Menggunakan Perintah Suara Berbasis Mikrokontroler Arduino,” vol. 9, no. 2, p. 12, 2015.

N. R. Wibowo, “RANCANG BANGUN SISTEM KENDALI KECEPATAN MOTOR DC SEBAGAI MEDIA PEMBELAJARAN PRAKTIKUM SISTEM KENDALI MENGGUNAKAN LABVIEW,” JST J. Sains Terap., vol. 6, no. 2, Sep. 2020, doi: 10.32487/jst.v6i2.775.

H. Susanto, T. Tarmukan, and M. Fauziyah, “Kontrol Kecepatan Putar Motor DC Pengaduk Pada Proses Peragian Kedelai Dalam Pembuatan Tempe Menggunakan Metode PID,” J. Elektron. Dan Otomasi Ind., vol. 6, no. 3, p. 2, Feb. 2021, doi: 10.33795/elkolind.v6i3.163.

I. Arifian, “Modul Komunikasi Sirkit Jalur DC Depo API Madiun dengan Arduino Protokol Modbus RTU RS485,” Tugas Akhir, Akademi Perkeretaapian Indonesia, Madiun, 2019.

M. Rukmana, “Data Logger Sistem Persinyalan Mekanik Siemens & Halske API Madiun berbasis Arduino Mega2560 dan Microsoft Visual Studio,” Tugas Akhir, Akademi Perkeretaapian Indonesia, Madiun, 2019.

“Pengertian dan Fungsi Potensiometer,” Teknik Elektronika. https://teknikelektronika.com/pengertian-fungsi-potensiometer/ (accessed Jun. 28, 2021).

“Fungsi Dioda dan Cara Mengukurnya,” Teknik Elektronika. https://teknikelektronika.com/fungsi-dioda-cara-mengukur-dioda/ (accessed Jun. 28, 2021).

“Pengertian Transistor dan Jenis-jenis Transistor,” Teknik Elektronika. https://teknikelektronika.com/pengertian-transistor-jenis-jenis-transistor (accessed Jun. 28, 2021).

DOI: https://doi.org/10.1593/jreec.v3i2.5255
slot gacor slot