Submissions

Online Submissions

Already have a Username/Password for Jurnal IPTEK?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Jurnal IPTEK publishes papers to international audiences of engineering researchers. The journal aims to provide a forum for scholarly understanding of the field of engineering and plays an important role in promoting the process that accumulated knowledge, values, and skills which will be transmitted from one generation to another; and to make methods and contents of the research in engineering available to industries and researchers. The journal encompasses a variety of topics, including civil engineering, mechanical engineering, electrical engineering, architecture, naval engineering, computer science, industrial engineering, chemical engineering, environmental engineering, mining engineering, geological engineering, product design, computer systems and engineering and information system.

All papers submitted to the journal should not have been published or submitted for publication elsewhere. The official language of the manuscript to be published in Jurnal IPTEK should be in Bahasa Indonesia or English.

1. General Guidelines

All manuscripts must be submitted to the Jurnal IPTEK using the online submission at our website (https://ejurnal.itats.ac.id/iptek). The author should register as Author (please select at the bottom of the form). If authors have any problems on the online submission, please contact Editorial Office at the following email: [email protected]

2. Manuscript Template

The manuscript should be prepared according to the following author guidelines in the MS Word article template: download the template of the Jurnal IPTEK (link).

3. Reviewing of Manuscripts

Every submitted paper is independently reviewed by at least two peer-reviewers. The decision for publication, amendment, or rejection is based upon their reports/recommendation and made by Editor. If two or more reviewers consider a manuscript unsuitable for publication in this journal, a statement explaining the basis for the decision will be sent to the authors within three months of the submission date.

4. Revision of Manuscripts

Revised manuscripts can be sent to the editorial office through the Online Submission Interface only.

5. Guideline for Online Submission

The author should first register as Author through the following address:
https://ejurnal.itats.ac.id/iptek/user/register

The author should fulfill the form as detail as possible. After all form textbox was filled, Author clicks on "Register" button to proceed the registration. Therefore, the Author is brought to the online submission interface where the Author should click on “New Submission”. The submission will be done in the five-step submission process. The following are five steps in the online submission process:

Step 1 - Starting the Submission: Select the Articles in the journal section. Then, the Author must check-mark on the submission checklists.
Step 2 – Uploading the Submission: To upload a manuscript to this journal, click Browse on the Upload submission file item and choose the manuscript document file (.doc/.docx) to be submitted, then click "Upload" button until the file has been uploaded.
Step 3 – Entering Submission’s Metadata: In this step, detail authors metadata should be entered including mark as the corresponding author. After that, the manuscript title and abstract must be uploaded by copying the text and paste in the textbox including the keywords. Please pay attention to enter all the authors' detail, not just the first author.
Step 4 – Uploading Supplementary Files: Basically, the Author need not upload anything here, except there are data or images that are separated from the manuscript.
Step 5 – Confirming the Submission: Author should final check the uploaded manuscript documents in this step. To submit the manuscript to Jurnal IPTEK, click Finish Submission button after ensuring that the documents are valid. The corresponding author or the principal contact will receive an acknowledgment by email and will be able to view the submission’s progress through the editorial process by logging in to the journal website.

After this submission, Author who submits the manuscript will get a confirmation email about the submission. Therefore, the Author is able to track their submission status at any time by logging in to the online submission interface. Submission tracking includes the status of the manuscript review and editorial process.

6. User Rights

All articles published as Open Access article. It is permanently free of charge for everyone to read and download.

7. Manuscript Preparation Guidelines

7.1 General Organization of Paper

The paper will be published in Jurnal IPTEK after the peer-reviewed process and decided as “Accepted” by Editor. The final paper layout will be reproduced by the Editorial Office of Jurnal IPTEK. The final paper layout in PDF type, known as “Uncorrected Proof” should be corrected by Author.

According to Engelmore and Morgan [1], manuscript content should, in general, be organized in the following order: Title; Authors Name; Authors Affiliation; Authors Email; Abstract (in English and Bahasa Indonesia); Keywords; Introduction; Methods; Results and Discussion; Conclusions and Suggestions; Acknowledgments; and References.

7.2 Section Headings

Three levels of heading are allowed as follows:

Level 1 (Heading1 format) - 11pt, Times New Roman bold, UPPERCASE, left aligned
Level 2 (Heading2 format) - 11pt, Times New Roman bold, Title Case, left aligned
Level 3 (Heading3 format) - 11pt, Times New Roman bold italic, Title Case, left aligned

7.3 Body Text

The body of the text is a set of body text paragraphs defined as follows:

11pt Times New Roman
One spaced
Spacing after the heading is 6 pts (0.21 cm)
Spacing before the new heading is 6 pts (0.21 cm) with 1 empty line
Indentation for the first line is 1.27 cm

7.4 Bullets

Bullet and numbering within body text are not allowed. All sentences should be typed as a descriptive paragraph.

7.5 Tables

Tables are sequentially numbered with the table title and number above the table. Tables should be centered in the column OR on the page. Elements of a table should be single-spaced. However, double spacing can be used to show groupings of data or to separate parts within the table. Table headings should be in 11pt not bold. Tables are referred to in the text by the table number, e.g., Table 1. Do not show the vertical line in the table. There is only a horizontal line should be shown in the table, as well as table heading.

7.6 Figures

Figures are sequentially numbered commencing at 1 with the figure title and number below the figure as shown in Figure 1.

7.7 Equations

The equation should be prepared using MS Equation Editor (not in image format). The equation number is to be placed on the right side of the equation.

7.8 Units, Abbreviations, and Symbols

Metric units are preferred and should be consistent throughout the body text. Define abbreviations and symbols for the first time as they are introduced in the text.

7.9 Manuscript Heading, Font, and Spacing

The manuscript should be typed using word processors (Microsoft Word) software. The font used throughout the paper is Times New Roman. The paper size is A4 (i.e., 210 x 297 mm), single-column format (mirrored-margin) with a 2.5 cm margin at the top, a 2.5 cm margin at the bottom, 3.0 cm margin on the inside, and 2.5 cm margin on the outside. Lines are one spaced, justified. Page numbers should be included in the text located in the footer section of each page. Use of pronouns such as I, we, etc. is to be avoided.

7.10 Paper Title

This is your opportunity to attract the reader’s attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper. Begin with the subject of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations.

The title of the paper should be in 13pt bold Times New Roman, Title Case, and be centered. The title should have 13 pts above and 5 pts below.

7.11 Authors Name, Affiliations, and Email

Write Author(s) names without a title and professional positions such as Prof, Dr, Production Manager, etc. Do not abbreviate your last/family name. Always give your First and Last names. Write a clear affiliation of all Authors. Affiliation includes a name of department/unit, (faculty), a name of university, address, country. Please indicate Corresponding Author (include email address) by adding a number in superscript behind the name.

Author names and affiliations should be in 11pt Times New Roman.

7.12 Abstract and Keywords

An abstract should stand alone, means that no citation in the abstract. Consider it the advertisement for your article. The abstract should tell the prospective reader what you did and highlight the key findings. Avoid using technical jargon and uncommon abbreviations. You must be accurate, brief, clear and specific. Use words which reflect the precise meaning. The abstract should be precise and honest. Please follow word limitations (max. 200 words). Please provide abstract both in English and Bahasa Indonesia.

Keywords are the labels of your manuscript and critical to correct indexing and searching. Therefore the keywords should represent the content and highlight of your article. Use only those abbreviations that are firmly established in the field. e.g. DNA. Each word/phrase in keyword should be separated by a semicolon (;), not a comma (,).

7.13 Introduction

An Introduction, Authors should state the objectives of the work at the end of the introduction section. Before the objective, Authors should provide an adequate background, and very short literature survey in order to record the existing solutions/method, to show which is the best of previous researches, to show the main limitation of the previous researches, to show what do you hope to achieve (to solve the limitation), and to show the scientific merit or novelties of the paper. Avoid a detailed literature survey or a summary of the results. Do not describe the literature survey as author by author, but should be presented as a group per method or topic reviewed which refers to some kinds of literature.

Example of novelty statement or the gap analysis statement at the end of the Introduction section (after state of the art of previous research survey): “........ (short summary of background)....... A few researchers focused on ....... There have been limited studies concerned on ........ Therefore, this research intends to ................. The objectives of this research are .........”.

7.14 Methods

Methods should make readers be able to reproduce the experiment. Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described. Do not repeat the details of established methods.

7.15 Results and Discussion

Results should be clear and concise. The results should summarize (scientific) findings rather than providing data in great detail. Please highlight differences between your results or findings and the previous publications by other researchers. The discussion should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

In the discussion, it is the most important section of your article. Here you get the chance to sell your data. Make the discussion corresponding to the results, but do not reiterate the results. Often should begin with a brief summary of the main scientific findings (not experimental results).

The following components should be covered in discussion: How do your results relate to the original question or objectives outlined in the Introduction section (what/how)? Do you provide interpretation scientifically for each of your results or findings presented (why)? Are your results consistent with what other investigators have reported (what else)? Or are there any differences?

7.16 Conclusions

Conclusions should answer the objectives of the research. Tells how your work advances the field from the present state of knowledge. Without clear Conclusions, reviewers and readers will find it difficult to judge the work, and whether or not it merits publication in the journal. Do not repeat the Abstract, or just list experimental results. Provide a clear scientific justification for your work, and indicate possible applications and extensions. You should also suggest future experiments and/or point out those that are underway.

7.17 Acknowledgment

Recognize those who helped in the research, especially funding supporter of your research. Include individuals who have assisted you in your study: Advisors, Financial supporters, or may another supporter, i.e. Proofreaders, Typists, and Suppliers, who may have given materials. Do not acknowledge one of the author's names.

7.18 References

Cite the main scientific publications on which your work is based. Cite only items that you have read. Do not inflate the manuscript with too many references. Avoid excessive self?citations. Avoid excessive citations of publications from the same region. Check each reference against the original source (authors name, volume, issue, year, DOI Number). Please use Reference Manager Applications like EndNote, Mendeley, Zotero, etc. Use other published articles in the same journal as models.

All publications cited in the text should be included as a list of references. References are sequentially numbered as they appear in the text. Reference numbers are indicated in square brackets. Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either “Unpublished results” or “Personal communication”. Citation of a reference as 'in press' implies that the item has been accepted for publication.

As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, a reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

This manuscript has to follow the Vancouver reference style. Please set it in the reference management software you use.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in Microsoft Word (doc/docx) document file format.
  3. Where available, URLs for the references have been provided.
  4. All illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
 

Copyright Notice

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  3. Jurnal IPTEK by LPPM-ITATS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Processing and Publication Fees: 400000.00 (IDR)

When we decide to publish your article after the peer review process, you have to pay IDR 400,000 which covers the costs of the editorial, peer review, and publication processes (inc. the DOI number registration). This fee includes also the shipping fee (when you reside in Java Island) for delivering the printed copy of the journal to you.

You should pay the article processing and publication fees via bank transfer (after receiving the article acceptance e-mail from us) to:

BNI LogoYustia Wulandari Mirzayanti
Bank Negara Indonesia (BNI)
Account number: 0372 515 212
Surabaya Branch

Please send the receipt to confirm the payment to [email protected] (subject: [Payment]) and enclose this information:

---
(Your) Full Name :
Bank Name :
Bank Account Number :
Account Holder :

Your Postal Address :
Mobile (Phone) Number :

* The printed version of the journal would be sent to the address you enclose after we receive your confirmation e-mail.

---

Article Submission Fees: 0.00 (IDR)

There are no article submission fees. The author with rejected articles should not pay any fees.