Analisis Pengaruh Temperatur dan Waktu Tuang terhadap Kekerasan dan Struktur Mikro pada Pengecoran Paduan Al – Si
Abstract
Full Text:
PDFReferences
M. T. Wijaya, Zubaidi, and Wijoyo, “Pengaruh Variasi Temperatur Tuang Terhadap Ketangguhan Impak Dan Struktur Mikro Pada Pengecoran Aluminium,” J. SIMETRIS, vol. 8, no. 1, pp. 219–224, 2017, doi: 10.24176/simet.v8i1.933.
B. Hidayanto, A. Wardoyo, and W. Darojad, “PENGARUH VARIASI TEMPERATUR TUANG PADA PENGECORAN DAUR ULANG Al-Si TERHADAP STRUKTUR MIKRO DAN KEKERASAN DENGAN POLA LOST FOAM,” Flywheel J. Tek. Mesin Untirta, vol. IV, no. 1, pp. 45–49, 2018.
M. Okayasu, K. Ota, S. Takeuchi, H. Ohfuji, and T. Shiraishi, “Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy,” Mater. Sci. Eng. A, vol. 592, pp. 189–200, 2014, doi: 10.1016/j.msea.2013.10.098.
J. G. Kaufman and E. L. Rooy, Aluminum Alloy Castings: Properties , Processes , and Applications. ASM International, 2004.
X. Hu, F. Ai, and H. Yan, “Influences of pouring temperature and cooling rate on microstructure and mechanical poperties of casting Al-Si-Cu aluminum alloy,” Acta Metall. Sin. (English Lett., vol. 25, no. 4, pp. 272–278, 2012, doi: 10.11890/1006-7191-124-272.
S. Drihandono and E. Budiyanto, “Pengaruh Temperatur Tuang, Temperatur Cetakan, dan Tekanan Pada Pengecoran Bertekanan (High Pressure Die Casting/HPDC) Terhadap Kekerasan dan Struktur Mikro Aluminium Paduan Silikon (Al-Si 7,79 %),” TURBO, vol. 5,no. 1, pp. 30–38, 2016, doi: 10.24127/trb.v5i1.116.
P. M. Khanh, N. H. Hai, D. Q. Khanh, and D. H. Bach, “Investigation of solidification process of as-cast ADC12 in sand molds with different pouring conditions by temperature field,” Key Eng. Mater., vol. 682, pp. 212–219, 2016, doi: 10.4028/www.scientific.net/KEM.682.212.
B. Haryanto and Suyitno, “PENGARUH TEMPERATUR TUANG DAN TEMPERATUR CETAKAN PADA HIGH PRESSURE DIE CASTING (HPDC) BERBENTUK PISTON PADUAN ALUMINIUM- SILIKON,” in Seminar Nasional Aplikasi Sains Dan Teknologi, 2008, pp. 86–90.
W. Sujana and A. Setiawan, “Pengaruh Temperatur Tuang Dan Waktu Tuang Terhadap Penyusutan Silinder Coran Alumunium Dengan Cetakan Logam,” J. Flywheel, vol. 3, no. 1, pp. 17–23, 2010.
Refbacks
- There are currently no refbacks.