Perancangan dan Analisa Sistem Perpipaan Pompa Sertifugal P.100/15 pada Unit Kilang Cepu

Indra Adi Gunawan, M arif, Donny Albari, Zain Lillahulhaq, Syamsuri Syamsuri, Anindya Rachma Dwicahyani

Abstract

A centrifugal pump is a pump that works on the principle of increasing fluid pressure by increasing speed through centrifugal force. The application of pumps is mostly carried out in the industrial sector to deliver fuel, air and other multi-phase fluids. The design of the pump must be adjusted to the layout of the piping system through which the fluid flows and consider the height of the pipe at the pump. In this research, the design and analysis of the piping system on the P.100/15 Sertifugal Pumps at the Cepu Refinery Unit was carried out. This research involved the mayor and minor losses in the piping system. In addition, the calculation of power in the piping system is also carried out. From the calculations made, the total head is 17.403 m with a pump power of 1.7 kW.

Full Text:

PDF

References

O. K. Lingga Yana, K. Rihendra Dantes, and N. A. Wigraha, “RANCANG BANGUN MESIN

POMPA AIR DENGAN SISTEM RECHARGING,” Jul. 2017. Accessed: Jan. 29, 2021.

[Online]. Available: https://ejournal.undiksha.ac.id/index.php/JPTM/article/view/10872.

A. A. Musyafa and I. H. Siregar, “PENGARUH JUMLAH SUDU SENTRIFUGAL

IMPELLER TERHADAP KAPASITAS DAN EFISIENSI POMPA SENTRIFUGAL,” May

Accessed: Jan. 29, 2021. [Online]. Available:

https://jurnalmahasiswa.unesa.ac.id/index.php/jtm-unesa/article/view/11600.

I. Mustain, “Penurunan Tekanan pada Pompa Air Laut pada Mesin Induk Kapal,” Maj. Ilm.

Gema Marit., vol. 22, no. 1, pp. 27–33, Mar. 2020, doi: 10.37612/gema-maritim.v22i1.48.

A. Hamid and H. Muwardi, “EVALUASI PENURUNAN TEKANAN PADA PEMIPAAN

SISTEM UDARA BERTEKANAN DI PT.INDOFOOD SUKSES MAKMUR (BOGASARI

FLOUR MILL).”

R. N. Sani, F. C. Nisa, R. D. Andriani, and J. M. Maligan, “Analisis Rendemen dan Skrining

Fitokimia Ekstrak Etanol Mikroalga Laut Tetraselmis chuii,” J. Pangan dan Agroindustri,vol. 2, no. 2, pp. 121–126, 2014, [Online]. Available:

https://jpa.ub.ac.id/index.php/jpa/article/view/44.

Z. Lillahulhaq and V. S. Djanali, “Numerical Study of Savonius Wind Turbine with FluidRotor Interactions,” IPTEK J. Proc. Ser., vol. 0, no. 1, p. 48, Apr. 2019, doi:

12962/j23546026.y2019i1.5106.

Z. Lillahulhaq and V. S. Djanali, “Unsteady simulations of Savonius and Icewind turbine

blade design using fluid-structure interaction method,” in AIP Conference Proceedings, Dec.

, vol. 2187, no. 1, p. 020009, doi: 10.1063/1.5138264.

O. : Kunarto, “PENYULUHAN POMPA DI PT. PURNAMA BOHLER TECHNOLOGI

BANDAR LAMPUNG,” Oct. 2018. Accessed: Jan. 29, 2021. [Online]. Available:

http://artikel.ubl.ac.id/index.php/PKM/article/view/1213.

P. Nikosai and P. Nikosai, “Optimasi Desain Impeller Pompa Sentrifugal Menggunakan

Pendekatan CFD,” Jan. 2016. doi: 10.12962/j23373520.v4i2.12319.

D. Sugiyanto and egar ruli Anmar, “Analisa Sistem Perpipaan Pompa Sentrifugal 1500 GPM

pada Mobil Pemadam Kebakaran,” J. Mech. Eng. Stud., vol. 3, no. 2, pp. 57–65, 2018.

D. Wahyudi, “Perbandingan Head dan Kapasitas Pompa Sentrifugal Tunggal dan Seri,”

ENERGY, vol. 9, no. 1, May 2019, Accessed: Jan. 29, 2021. [Online]. Available:

https://ejournal.upm.ac.id/index.php/energy/article/view/553.

I. Febrianto, M. Khabib, and B. S. Nugraha, “PERANCANGAN SISTEM POMPA

PARALEL DENGAN DAYA BERVARIASI UNTUK MENINGKATKAN KAPASITAS

AIR,” J. CRANKSHAFT, vol. 1, no. 1, Sep. 2018, doi: 10.24176/crankshaft.v1i1.2584.

S. Nugroho and D. Aries Himawanto, “PENGARUH JUMLAH SUDU TERHADAP UNJUK

KERJA DAN KAVITASI POMPA SENTRIFUGAL,” Mar. 2014. Accessed: Jan. 29, 2021.

[Online]. Available: https://jurnal.ft.uns.ac.id/index.php/mekanika/article/view/121.

Refbacks

  • There are currently no refbacks.