Analysis of Potential Hazards in the Production Process of Railway Passenger Benches Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) and Fault Tree Analysis (FTA) Methods Case Study: PT. Empat Putera Utama Bersama

Danang Bagus Pambudi, Gatot Basuki HM

Abstract

The increasing competition of companies requires a company to optimize all existing human resources (HR) to minimize risks that can hinder production process activities, PT. Four Putera Utama Bersama is a company engaged in the production of train passenger seats. There are several activities, namely preparation, production, assembly and finishing. The purpose of this study is to find out the type of hazard, and risk assessment with the HIRIARC method, while the FTA method is used to find the root cause of the problem. The results of the analysis will be used to mitigate any risk activities that occur in the production process of train passenger seats. The results of the study showed that there were 4 work activities and 11 work sub-activities that had potential dangers in activities. Risk assessment was obtained 3 activities with potential hazards in the extreme category, 2 activities with potential hazards in the high category, 2 activities with potential hazards in the moderate category  and 4 activities with potential hazards in the lowcategory, risk control was carried out on potential hazards that had extreme categoriesnamely pinched by the bench, hands hit by cutters and hands scratched by the bench frame that is still sharp.  

Keywords

HIRARC, FTA, Risk Rating

Full Text:

PDF

References

D. Sudiantini, A. Naiwasha, A. Izzati, A. Ayunia, B. Putri, and C. Rindiani, “Penggunaan Teknologi Pada Manajemen Sumber Daya Manusia Di Dalam Era Digital Sekarang,” Jurnal Publikasi Ilmu Manajemen dan E-Commerce, vol. 2, no. 2, pp. 262–269, 2023.

E. N. Prastika, “Peningkatan Kinerja Perusahaan melalui Pengelolaan Karyawan yang Berkualitas,” Journal of Research in Management Business and Social Science, vol. 1, no. 1, pp. 1–9, 2023.

E. Setyo Rini and N. Hidayatul laili, “Pengaruh Pengetahuan Kesehatan dan Keselamatan KerjaTerhadap Kinerja Karyawan UDD PMI Kota Surakarta Bulan Maret Tahun 2021,” Arrazi: Scientific Journal of Health, vol. 2, no. 1, pp. 15–23, 2024, [Online]. Available: https://journal.csspublishing/index.php/arrazi

S. Wati and A. J. Nugroho, “Analisis Resiko Kecelakaan Kerja Dengan Metode Hazard Identification Risk Assessment & Risk Control (HIRARC) Studi Kasus: PT Madubaru PG PS Madukismo,” Jurnal Penelitian Rumpun Ilmu Teknik (JUPRIT), vol. 2, no. 3, pp. 227–244, 2023, [Online]. Available: https://doi.org/10.55606/juprit.v2i3.2256

I. A. K. P. Mayuni Devi and T. Trianasari, “Analisis Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pada Bagian Laboratorium Di PT Tirta Investama Aqua Mambal (Sebuah Kajian Dari Perspektif Manajemen Sumber Daya Manusia),” Bisma: Jurnal Manajemen, vol. 7, no. 2, p. 303, 2021, doi: 10.23887/bjm.v7i2.32512.

A. I. H. Cholilalah, Rois Arifin, “Angewandte Chemie International Edition, 6(11), 951–952.,” Angewandte Chemie International Edition, 6(11), 951–952., vol. 2, pp. 82–95, 1967.

G. Basuki, “Analisis Risiko K3 Dengan Pendekatan HIRARC (Hazard Identification, Risk Assesment And Risk Control) Pada Bagian Finishing di PT Symgreen,” Seminar Nasiona Sains dan Teknologi Terapan, pp. 420–426, 2021, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/2241/0

G. Basuki and Y. W. Dari, “Analisis K3 pada Unit Rangka Bawah UPT Balai Yasa Surabaya Gubeng Menggunakan Metode Hazard Identification Risk Assessment ( HIRARC ),” Senastitan, vol. 1, no. 4, pp. 1–7, 2024.

G. E. Amanda, “Sistem Produksi Dan Manajemen Keselamatan Dan Kesehatan Kerja Pada Pt. Prima Dinamika Sentosa,” pp. 6–49, 2023, [Online]. Available: http://repository.upnjatim.ac.id/17364/3/19032010016-bab2.pdf

Yunia Dwi Sulfana and Achmad Fauzi, “Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Untuk Pencegahan Kecelakaan Kerja Di Pt. Sumber Dringu Windu Makmur Kota Probolinggo,” Jurnal Akuntansi dan Manajemen Bisnis, vol. 4, no. 1, pp. 11–14, 2024, doi: 10.56127/jaman.v4i1.1062.

P. Studi, T. Industri, F. Teknik, U. M. Area, and U. M. Area, “ANALISIS DAN PENGENDALIAN RISIKO KECELAKAAN KERJA DI PT . CAHAYA BARU SHIPYARD DENGAN METODE HAZARD IDENTIFICATION RISK ASSESSMENT & RISK CONTROL ( HIRARC ) SKRIPSI OLEH : Hadirat Alkadir Waruwu ANALISIS DAN PENGENDALIAN RISIKO KECELAKAAN KERJA DI PT . CA,” 2024.

W. Ridwan, R. Widiastuti, and E. Nurhayati, “Analisis Pengendalian Kualitas Bibit Sawit Dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failutre Mode Effect Analysis (FMEA) di PT. Kapuas Sawit Sejahtera,” Reslaj : Religion Education Social Laa Roiba Journal, vol. 5, no. 6, pp. 3730–3738, 2023, doi: 10.47467/reslaj.v5i6.2741.

S. Anwar, R. B. Ulum, and A. Widarman, “Analisis Pengendalian Kualitas Dengan Menggunakan Metode Fta (Fault Tree Analysis) Dan Fmea (Failure Mode and Effect Analysis) Pada Proses Produksi Pita Cukai Berperekat Di Perusahaan Percetakan Dokumen Sekuriti Karawang,” Jurnal Ilmiah Multidisiplin, vol. 2, no. 04, pp. 114–128, 2023, doi: 10.56127/jukim.v2i04.813.

DOI: https://doi.org/10.31284/j.jtm.2025.v6i1.6642

Refbacks

  • There are currently no refbacks.