Desain Shell and Tube Heat Exchanger (STHE) Tipe Counter Current dengan Material Stainless Steel

Eka Cahya Muliawati

Abstract

A heat exchanger or commonly referred to as a heat exchanger is a tool that is commonly used in the industrial world. The function of this tool is to cool down a fluid. There are various types of heat exchangers, including shell and tube. The purpose of this research is to design a heat exchanger that is good and correct and has a fairly high effectiveness in accordance with the existing heat exchanger design rules. The object of this research is a heat exchanger with a size of OD in, 16 BWG with stainless steel material which has a counter current type which is used to cool the type of air at a temperature of 80°C to 60°C with the help of an air type fluid also at a temperature of 60°C. 30°C. The effectiveness of the tool is quite large, namely 88.7%.

Full Text:

PDF

References

K. Thulukkanam, “Heat Exchanger Design Handbook, Second Edition - Kuppan Thulukkanam,” p. 1260, 2013.

J. Saari, “Faculty of Technology LUT Energy HEAT EXCHANGER,” pp. 1–101, 2011.

R. Mukherjee, “s Figure 1. TEMA designations for shell-and-tube heat exchangers,” no. February, 2015.

B. Septian, A. Aziz, and P. D. Rey, “Design of Heat Exchanger Shell and Tube,” J. Baut dan Manufaktur, vol. 03, no. 1, pp. 53–60, 2021.

S. T. Pramesti and I. Made Arsana, “Experimental study of baffle angle effect on heat transfer effectiveness of the shell and tube heat exchanger using helical baffle,” J. Mech. Eng. Res. Dev., vol. 43, no. 3, pp. 332–338, 2020.

E. Ningsih, Fitriana, and D. Pratiwi, “Desain Alat Penukar Panas Tipe Shell and Tube dengan Material Stainless Steel,” pp. 81–89, 2022.

A. Ratnawati, A. S.-T. J. P. Studi, and undefined 2018, “DESAIN ULANG ALAT PENUKAR KALOR TIPE SHELL AND TUBE DENGAN MATERIAL TUBE CARBON STELL DAN STAINLESS STELL 304,” pdfs.semanticscholar.org, Accessed: Aug. 27, 2022. [Online]. Available: https://pdfs.semanticscholar.org/c127/013a8858357beb8ffda84417024f1683460b.pdf.

R. Wicaksono, R. A. Wicaksono, and A. B. K. Putra, “Studi Numerik Perpindahan Panas Konveksi Paksa pada Pin Fin Berpenampang Circular dengan Susunan Staggered,” J. Tek. ITS, vol. 8, no. 2, pp. B87–B93, Jan. 2020, doi: 10.12962/j23373539.v8i2.47384.

P. Sampelawang, N. Pasae, N. Nitha, and W. Y. Tandirerung, “KARAKTERISTIK PERPINDAHAN PANAS HEAT EXCANGER DALAM ENCLOSURE PADA POSISI SIMETRIS DENGAN PERUBAHAN BEBAN PANAS,” Mech. Eng. Sci., vol. 1, no. 2, pp. 1–4, Nov. 2019, Accessed: Aug. 27, 2022. [Online]. Available: http://journals.ukitoraja.ac.id/index.php/mes/article/view/795.

E. Rohani, “PROSES PENGOLAHAN MINYAK MENTAH PT. Pertamina EP Asset 4 Field Sukowati,” 2022, Accessed: Aug. 30, 2022. [Online]. Available: http://repository.upnjatim.ac.id/8151/3/18031010166-BAB 2.pdf.

A. Shalsa, B. Wardhani, and A. T. Labumay, “Influence of Fluid Inflow Rate on Performance Effectiveness of Shell and Tube Type Heat Exchanger,” 2022, doi: 10.31284/j.jmesi.2022.v2i1.2993.

R. Beldar and S. Komble, “Mechanical Design of Shell and Tube Type Heat Exchanger as per ASME Section VIII Div.1 and TEMA Codes for Two Tubes,” Int. J. Eng. Tech. Res., vol. 8, no. 7, pp. 1–4, 2018.

M. Bakrie and M. Fatimura, “Optimalisasi Rancangan Shell-Dan-Tube Heat Exchagers (Tinjauan Literatur),” J. Redoks, vol. 5, no. 2, p. 116, 2020, doi: 10.31851/redoks.v5i2.4992.

Muliawati, E. C., Santoso, M., Ismail, A. F., Jaafar, J., Salleh, M. T., Nurherdiana, S. D., & Widiastuti, N. (2017). Poly (Eugenol Sulfonate)-Sulfonated polyetherimide new blends membrane promising for direct methanol fuel cell. Malaysian Journal of Analytical Sciences, 21(3), 659-668.

Muliawati, E. C., Ismail, A. F., Jaafar, J., Widiastuti, N., Santoso, M., Taufiq, M., ... & Atmaja, L. (2019). Sulfonated PEI membrane with GPTMS-TiO2 as a filler for potential direct methanol fuel cell (DMFC) applications. Malaysian Journal of Fundamental and Applied Sciences, 15(4), 555-560.

Muliawati, E. C., Widiastuti, N., Santoso, M., Ismail, A. F., & Jaafar, J. (2017). Poly (Eugenol Sulfonate)-Sulfonated Polyetherimide-Titanium Dioxide (TiO2) New Blends Membrane Promising For Direct Methanol Fuel Cell (DMFC). Proceedings Book, 36.

Muliawati, E. C., & Mirzayanti, Y. W. (2021). Membran Polieugenol Tersulfonasi (PET) Sebagai Potensi Sel Bahan Bakar Metanol Langsung. Journal of Research and Technology, 7(2), 247-256.

DOI: https://doi.org/10.31284/j.joiche.2022.v2i2.3860

Refbacks

  • There are currently no refbacks.