Defining Ship Principal Dimensions Using Comparison Method

Renanda Bayu Harsi, Nuzulul Arif

Abstract


Abstract

In the process of finding the principal dimension of the ship there are various methods that can be used. In this study, the Comparison method will be used to obtain the main size of the ship and the main dimensions of the ship are obtained, namely, length (L) = 20,152 meters, beam (B) = 5.5 meters, depth (H) = 2,939 meters, draft (T) = 1.5129 meters, service speed (Vs) = 20 knots. The ship's resistance is 152.6 kN at service speed (Vs) = 20 knots. And can be overcome with a power of 2426.31 HP. The power taken to meet these needs is 2500 HP supplied by 2 outboard engines with a power of 1300 HP each.

Keywords : Comparison Method.


Full Text:

PDF

References


K. A. Indrawan, Pramudya, and Soejitno, “Perancangan Kapal Penumpang Cepat di Pantai Sanur Kapasitas 52 Penumpang untuk Menunjang Pariwisata di Nusa Penida, Bali,” 2019.

Hardjono, Soegeng, “Kajian Karakteristik Desain Kapal Penumpang yang Sesuai untuk Perairan Kabupaten Kepulauan Anambas,” 2013.




DOI: https://doi.org/10.31284/j.jasmet.2021.v2i2.2129

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Renanda Bayu Harsi

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Mailing Address: Journal of Applied Sciences, Management and Engineering Technology - ITATS Institut Teknologi Adhi Tama Surabaya Jl. Arief Rahman Hakim No.100, Surabaya 60117 email: [email protected] Website : https://ejurnal.itats.ac.id/jasmet/index Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.