Capaian Kinerja LPPM ITATS
Abstract
Buku Capaian Kinerja LPPM ITATS Volume 1 Nomor 2 Tahun 2022 ini adalah perwujudan ringkasan yang telah dilaksanakan LPPM ITATS pada periode Tahun 2018 mengenai pencapaian kinerja dan strategi yang meliputi program perencanaan, penyelenggaraan, dan evaluasi atas pengembangan SDM di ITATS, terutama dalam ranah penelitian dan pengabdian kepada masyarakat, dalam upaya mendukung pencapaian visi dan misi ITATS.
Buku ini menyajikan rangkuman terkait penyelenggaraan program kerja LPPM ITATS yang dimulai dari peningkatan kualitas SDM, tinjauan manajemen LPPM, peningkatan kerjasama dan pemanfaatan peluang, penguatan publikasi karya ilmiah serta Kekayaan Intelektual, dan pelaksanaan Kuliah Kerja Nyata Pembelajaran Pemberdayaan Masyarakat (KKN-PPM).
Besar harapan bahwa buku ini dapat memberikan banyak manfaat serta dapat menjadi salah satu referensi dalam proses pengembangan penelitian dan pengabdian masyarakat di perguruan tinggi.
Full Text:
PDFReferences
A. A. Ary Dwi Jatmiko, “Desain Denah Rumah Tinggal untuk Kebutuhan Rumah Ramah Lingkungan Studi Kasus – Rumah Tinggal di Pondok Candra, Sidoarjo,” J. IPTEK, pp. 51 – 58, 2018, [Online]. Available: file:///D:/j. iptek.pdf.
L. Retnawati, “Perancangan Enterprise Architecture Menggunakan TOGAF di Universitas ABC,” J. IPTEK, vol. 22, no. 1, p. 13, 2018, doi: 10.31284/j.iptek.2018.v22i1.221.
Y. Jone, “Kajian Potensi Air Tanah Dan Pembagian Wilayah Potensi di Cekungan Air Tanah Maumere,” J. IPTEK, vol. 22, no. 1, p. 21, 2018, doi: 10.31284/j.iptek.2018.v22i1.229.
M. Ulum, “Studi Experimental Energi Bangkitan Pembangkit Listrik Tenaga Gelombang Laut Model Pelampung Silinder,” J. IPTEK, vol. 22, no. 1, p. 29, 2018, doi: 10.31284/j.iptek.2018.v22i1.231.
L. A. Hermanto, “Prakiraan Tinggi Gelombang Air Laut Menggunakan Data Mining,” J. IPTEK, pp. 51 – 58, 2018, [Online]. Available: file:///D:/j. iptek.pdf.
W. E. Primaningtyas, S. Suheni, and F. A. Pradana, “Pengaruh Ukuran Partikel Serbuk Bonggol Jagung Terhadap Sintesis Komposit Kampas Rem Non-Asbestos,” J. IPTEK, vol. 22, no. 1, p. 45, 2018, doi: 10.31284/j.iptek.2018.v22i1.235.
S. S. Gatot Basuki Hari Mukti, “Meningkatkan Kinerja Pegawai Balai Besar Karantina Pertanian Surabaya dengan Menganalisa Pengaruh Gaya Kepemimpinan, Budaya Kerja dan Remunerasi,” J. IPTEK, pp. 51 – 58, 2018, [Online]. Available: file:///D:/j. iptek.pdf.
E. Pranatal and M. M. Z. Beu, “Analisa CFD Penggunaan Duct pada Turbin Kombinasi Darrieus-Savonius,” J. IPTEK, vol. 22, no. 1, p. 63, 2018, doi: 10.31284/j.iptek.2018.v22i1.239.
R. Arief, “Aplikasi Pembayaran dan Perizinan Santri Ponpes Assalafi Al Fithrah Surabaya Berbasis Web,” J. IPTEK, vol. 22, no. 1, p. 71, 2018, doi: 10.31284/j.iptek.2018.v22i1.241.
A. A. Arifiyanti, R. M. Pradana, and I. F. Novian, “Klasifikasi Produk Retur dengan Algoritma Pohon Keputusan C4.5,” J. IPTEK, vol. 22, no. 1, p. 79, 2018, doi: 10.31284/j.iptek.2018.v22i1.243.
R. Parlika, M. F. Hidayat, H. R. Putra, V. H. Satria, H. F. Lesmana, and F. H. Pralas, “Studi Komparatif Model Proses Perangkat Lunak Terhadap Karakteristik Sistem ERP,” J. IPTEK, vol. 22, no. 2, pp. 1–8, 2019, doi: 10.31284/j.iptek.2018.v22i2.252.
D. P. A. R. Hakim, A. Budijanto, and B. Widjanarko, “Sistem Monitoring Penggunaan Air PDAM pada Rumah Tangga Menggunakan Mikrokontroler NODEMCU Berbasis Smartphone ANDROID,” J. IPTEK, vol. 22, no. 2, pp. 9–18, 2019, doi: 10.31284/j.iptek.2018.v22i2.259.
Y. A. Prabowo, “Pengendalian Gerakan Diving pada Unmanned Underwater Vehicle (UUV) Menggunakan Adaptive Nonlinier Model Predictive Control (ANMPC),” J. IPTEK, pp. 51 – 58, 2018, doi: 10.31284/j.iptek.2018.v22i2.
M. Kurniawan and N. Suciati, “Premise Parameter Optimization on Adaptive Network Based Fuzzy Inference System Using Modification Hybrid Particle Swarm Optimization and Genetic Algorithm,” J. IPTEK, vol. 22, no. 2, pp. 27–34, 2019, doi: 10.31284/j.iptek.2018.v22i2.274.
D. H. Sulaksono and A. C. P. Siregar, “Komputasi Penentuan Kualitas pada Fiber Optik Berdasarkan Rugi Daya dengan Gaussian Naive Bayes Menggunakan Teknologi CUDA,” J. IPTEK, vol. 22, no. 2, pp. 35–42, 2019, doi: 10.31284/j.iptek.2018.v22i2.322.
F. Abdul and H. Wasik, “Analisa Penggunaan Beberapa Jenis Arang Lokal Sebagai Reduktor dalam Proses Pembuatan Besi Spon (Sponge Iron) dari Bahan Baku Pasir Besi Menggunakan Metode Reduksi Langsung,” J. IPTEK, vol. 22, no. 2, pp. 43–50, 2019, doi: 10.31284/j.iptek.2018.v22i2.417.
M. Wora and F. X. Ndale, “Pengaruh Penambahan Serat Ijuk Dapat Meningkatkan Kuat Tarik pada Beton Mutu Normal,” J. IPTEK, vol. 22, no. 2, pp. 51–58, 2019, doi: 10.31284/j.iptek.2018.v22i2.435.
N. Fanani and E. Ningsih, “Analisis Kualitas Minyak Goreng Habis Pakai yang Digunakan oleh Pedagang Penyetan di Daerah Rungkut Surabaya Ditinjau dari Kadar Air dan Kadar Asam Lemak Bebas (ALB),” J. IPTEK, vol. 22, no. 2, pp. 59–66, 2019, doi: 10.31284/j.iptek.2018.v22i2.436.
R. R. Putri, “Peningkatan Akurasi Perkiraan Biaya dan Waktu Proyek Perangkat Lunak Berdasarkan Model Fuzzy Gaussian dan Perubahan Nilai Parameter,” J. IPTEK, vol. 22, no. 2, pp. 67–76, 2019, doi: 10.31284/j.iptek.2018.v22i2.447.
H. Bahalwan, “Kajian Psikologi Desain, Desain Interface Speedometer Sepeda Motor Metik, Tentang Pengaruh Cara Orang Berkendara,” J. IPTEK, vol. 22, no. 2, pp. 77–86, 2019, doi: 10.31284/j.iptek.2018.v22i2.448.
A. W. S. D. Rachmanu Eko Handriyono, “KAJIAN DEPOSISI ASAM DI KAWASAN SURABAYA TIMUR,” pp. 27–34.
A. Bimantara, P. Andhi, and I. Kusuma, “Fire Fighter Boat : Tinjauan Aspek Penggerak, Stabilitas Dan Olah Gerak,” p. 35.
M. N. Kusuma and D. Yulfiah, “Hubungan Porositas Dengan Sifat Fisik Tanah Pada Infiltration Gallery,” Semin. Nas. Sains dan Teknol. Terap., vol. 6, pp. 43–50, 2018.
Sulistyowati, B. E. Ketherin, A. A. Arifiyanti, and A. Sodik, “Analisa Segmentasi Konsumen Menggunakan Algoritma K-Means Clustering,” Semin. Nas. Sains dan Teknol. Terap. VI 2018, pp. 51–58, 2018.
A. N. Ramadhani, “Kampung Vertikal Sebagai Strategi Urban Renewal Di Kampung Lumumba, Surabaya,” NALARs, vol. 20, no. 2, p. 109, 2021, doi: 10.24853/nalars.20.2.109-118.
O. Hildawan and M. Basuki, “Desain Rancang Bangun Feed Barge Sebagai Media,” pp. 79–86, 2018.
Yulfiah, “Mempersiapkan Usaha Kecil Menengah Menuju Industri Hijau,” Semin. Nas. Sains dan Teknol. Terap. VI 2018 Inst. Teknol. Adhi Tama Surabaya Dalam, no. 05, pp. 87–92, 2011.
M. A. Rois, P. I. Santosa, and E. Pranatal, “Study Analisis Pekerjaan Fairing Pada Lambung Kapal Di PT. PAL Indonesia,” Semin. Nas. Sains dan Teknol. Terap., pp. 93–100, 2018.
M. N. WK, M. Basuki, and E. Pranatal, “Analisa Biaya Dan Waktu Project Crashing Pada Pembangunan Kapal Baru ( Studi Kasus Pemmbangunan Kapal Cargo Ro-Pax 300 Di Pt . Adiluhung Sarana Segara Indonesia ),” Semin. Nas. Sains dan Teknol. Terap. VI 2018 Inst. Teknol. Adhi Tama Surabaya, pp. 101–108, 2018.
K. Setyawan, M. Basuki, and Soejitno, “Study Perencanaan Modifikasi Kapal LCT ‘KM. Trisna Dwitya’ Menjadi Kapal Ferry di PT. Dok Perkapalan Surabaya (Persero) Ditinjau Dari Segi Teknis,” Semin. Nas. Sains dan Teknol. Terap. VI 2018, pp. 109–114, 2018.
R. Rohmatulloh et al., “Analisa Risiko Pencemaran Lingkungan Akibat Operasional Kapal Di Pelabuhan Tanjung Perak Surabaya,” Pros. Semin. Nas. Sains dan Teknol. Terap., vol. 0, no. 0, p. 115, 2018, [Online]. Available: https://ejournal.itats.ac.id/sntekpan/article/view/362.
I. P. A. I. K. Ikbal Herlambang, Pramudya Imawan, “Rancang Bangun Trasher Boat Sebagai Moda Surabaya,” pp. 123–132, 2018.
M. Basuki, “ANALISA KEGAGALAN OPERASIONAL MOTOR INDUK PADA KAPAL KM XYZ MENGGUNAKAN METODE FMEA (FAILURE MODE AND EFFECT ANALYSIS),” Semin. Nas. Sains dan Teknol. Terap. VI 2018 Inst. Teknol. Adhi Tama Surabaya, pp. 133–140, 2018.
C. Pramana, M. Basuki, and E. Pranatal, “Analisa Risiko Operasional Proses Bangunan Kapal Baru (Studi Kasus Pembangunan Kapal LPD 124 M Di PT. Pal Indonesia (Persero)),” Semin. Nas. Sains dan Teknol. Terap. IV 2018 ITATS, vol. VI, pp. 149–156, 2018.
D. B. Wahyu, I. S. Pramudya, and M. M. Z. B, “STUDI KOMPARASI ANTARA CORRUGATED PANEL DENGAN L STIFFENED DAN FLAT-BAR STIFFENED SEBAGAI ALTERNATIF PERBAIKAN STRUKTUR KAPAL DENGAN METODE ELEMEN HINGGA Dosen Jurusan Teknik Perkapalan ITATS,” pp. 157–164.
P. I. Santosa, “Jurusan Teknik Perkapalan - Fakultas Teknologi Mineral dan Kelautan,” pp. 165–176.
Joao Guterres, Minto Basuki, and Erivife Pranatal, “Analisis Penerapan Ballast Water Management Sesuai Regulasi IMO pada Kapal yang Beroperasi di Perairan Timor-Leste,” Semin. Nas. Sains dan Teknol. Terap., pp. 183–192, 2018.
F. Harianto, M. F. N. A, E. M. Setyo, I. Teknonologi, and A. Tama, “Pengaruh Pemberian Uang Makan Terhadap Produktivitas Tenaga Kerja Di Proyek Pembangunan Perumahan Natura Residences Surabaya,” pp. 211–216, 2018.
Y. Dwi, G. Cahyono, L. Utamakno, and H. Bahar, “Menentukan Kestabilan Pilar,” vol. 2.
Y. Fanani, Y. Jone, D. H. Wahono, T. Pertambangan, T. Adhi, and T. Surabaya, “Identifikasi Potensi Sebaran Bahan Galian Kabupaten Ngawi Jawa Timur,” pp. 283–288, 2018, [Online]. Available: http://ejurnal.itats.ac.id/sntekpan/article/view/412.
G. S. Utami, J. Caroline, and T. Sipil, “Analisis Pengaruh Perubahan Kadar Air Terhadap Parameter Kuat Geser Tanah,” Pros. Semin. Nas. Sains dan Teknol. Terap., vol. 0, no. 0, p. 289, 2018, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/413.
T. Rizkiyanti, D.S., dan Alifiah, “Kinerja Trickling Filter Untuk Mengolah Limbah Cair Katering Dengan Variasi Media Bioball Dan Batu Apung Ditinjau Dari Parameter BOD5 Dan COD,” Sains dan Teknol. Terap. VI, vol. 2, no. 1, pp. 297–302, 2018.
A. Nindyapuspa and T. Alfiah, “Penurunan Kadar Cu Dalam Proses Solidifikasi Limbah Oli Bekas 15% Menggunakan Semen Portland dan Bentonit,” Semin. Nas. Sains dan Teknol. Terap., no. October, p. 303, 2018.
M. A. Lamanele, D. P. P. Siwi, M. R. F. Gugutu, and W. S. Pambudi, “Software Pendeteksi Plat Nomor Kendaraan Bermotor Untuk Pelanggaran Traffic Light Dengan Menggunakan Kamera,” pp. 315–320, 2018.
T. Suheta, “PEMBUATAN ALAT PENYORTIR TERUNG OTOMATIS BERDASARKAN UKURAN BAGI PRODUSEN BAHAN BAKU TERUNG KERING DI KELURAHAN SUKOLILO BARU BULAK,” pp. 321–326.
E. W. R. Widodo, V. A. Setyowati, Suheni, and I. Qiromi, “Variasi Jenis Kampuh Las Dan Kuat Arus Pada Pengelasan Logam Tidak Sejenis Material Stainless Steel 304L Dan Baja Aisi 1040 Dengan Gas Tungsten Arc Welding,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 327–332, 2018.
S. Khadafi and M. Silaturrachman, “Server Sebagai Data Sharing Dan Printer Sharing,” pp. 333–338, 2018.
R. K. Umam and N. P. Hariastuti, “Analisa Kepuasan Pelanggan Dengan Menggunakan Metode Customer Satisfaction Index (CSI) Dan Importance Performance Analysis (IPA),” Pros. Semin. Nas. Sains dan Teknol. Terap., pp. 339–344, 2018, [Online]. Available: http://ejurnal.itats.ac.id/sntekpan/article/view/366.
N. L. P. Prassetyo, E. B., Hariastuti, “Analisis Pengendalian Kualitas Dengan Menggunakan Metode Six Sigma Sebagai Usaha Mengurangi Produk Cacat Di PT. Antar Suya Jaya Surabaya,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 345–350, 2018.
A. Efendik, N. Luh, and P. Hariastuti, “Pengendalian Kualitas Produk Dengan Pendekatan Six Sigma Dan Serta Seven Tools Sebagai Usaha Pengurangan Kecacatan Produk Pada Cv. Prima Perkasa,” Inst. Teknol. Adhi Tama Surabaya, vol. VI, pp. 351–356, 2018.
E. Kusdarini and S. H. Yuwanto, “PENDAMPINGAN USAHA KULINER PENTOL MODERN,” pp. 357–362.
Hamdan Bahalwan, “PERANCANGAN DESAIN KLOSET UNTUK MALL ( STUDI KASUS : KOTA SURABAYA ) Jurusan Desain Produk Institut teknologi Adhi Tama Surabaya,” pp. 363–368.
G. Wicaksono, “Analisis kombinasi alat berat untuk pekerjaan galian di proyek grand sungkono lagoon,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 377–382, 2018.
E. Susanti, “Analisis Komparasi Perencanaan Struktur Rangka Atap Baja Ringan Untuk Rumah Tipe 180 Dengan Tipe,” 2000.
K. Udyani, E. Ningsih, and M. Arif, “Pengaruh Temperatur Pirolisis Terhadap Yield dan Nilai Kalor Bahan Bakar Cair dari Bahan Limbah Kantong Plastik,” Semin. Nas. Sains dan Teknol. Terap. VI, no. 2013, pp. 389–394, 2018.
G. E. Rosalina et al., “Pra desain pabrik gelatin dari tulang ikan tuna,” Semin. Nas. Sains dan Teknol. Terap., pp. 395–400, 2018.
I. Nur et al., “Pemanfaatan Kantong Semen Sebagai Sepatu Kasual Pria,” Semin. Nas. Sains dan Teknol. Terap. VI 2018 Inst. Teknol. Adhi Tama Surabaya, pp. 401–406, 2018.
M. Hima, M. J. Hidayat, and C. Anam, “Pemanfaatan Sisa Hasil Potong Kulit Dari Proses Finishing Pada Industri Penyamakan Kulit Menjadi Sepatu Wanita,” Inst. Teknol. Adhi Tama Surabaya, pp. 407–412, 2018.
A. Y. Ismail, M. Ulum, J. T. Mesin, and F. T. Industri, “DAN SAMBUNGAN ANTAR PANEL TERHADAP FREKUENSI NATURAL PANEL BERLUBANG GANDA Jurusan Teknik Mesin , Fakultas Teknologi Industri ,” pp. 413–418.
A. D. Radityaningrum, N. Kusuma, J. T. Lingkungan, and F. Teknik, “Tangki Septik Menggunakan Tanaman Cyperus Papyrus Pada Pengolahan Constructed Wetland,” pp. 419–424, 1997.
S. Nurmuslimah and H. Sriwijaya, “Sistem Pendukung Keputusan Penentuan Jumlah Produksi Tahu Menggunakan Metode Fuzzy Tsukamoto,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 425–432, 2018.
M. Hakimah, T. Indriyani, and S. Azizah, “Pada Ibu Pkk Dan Karang Taruna Di Dusun Krajan,” pp. 433–440.
A. D. Prasetyo and E. Yuliawati, “Analisis Performansi Supply Chain dengan Pendekatan Green SCOR dan ANP,” Semin. Nas. Sains dan Teknol. Terap. VI, vol. 3, no. 2, pp. 441–446, 2018.
H. S. D. Girsang and F. Wahmuda, “Eksperimen Produk Fungsional limbah Akrilik dengan Teknik Pemanasan dalam Penerapan Desain Fesyen Aksesoris,” Pros. Semin. Nas. Sains …, pp. 465–470, 2018, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/327.
S. Ramadhani and R. Puspitasari, “Penggunaan Smart Phone Sebagai Salah Satu Media Pemasaran Untuk Meningkatakan Penjualan Kerajinan Kerang Pantai Kenjeran Surabaya,” Pros. Semin. Nas. Sains dan Teknol. Terap., pp. 471–476, 2018.
C. D. Permatasari, I. Ratniarsih, and S. Sukarnen, “Penerapan Konsep Representatif Intensif Pada Desain Ruang Fasilitas Edukasi Anak Tunalaras Di Surabaya,” Semin. Nas. Sains dan Teknol. Terap., no. 1, pp. 477–484, 2018, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/329.
A. R. T. P. Christi and E. Yuliawati, “Analisis Perencanaan Dan Pengendalian Material Biaya Persediaan,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 485–492, 2018.
A. A. Putra and J. T. Industri, “DESAIN PRODUCT SERVICE SYSTEM DENGAN.”
R. Arief, M. I. Wazirudin, A. Rachman, and D. P. Hapsari, “Pengembangan aplikasi pembelajaran TIK berbasis web menggunakan model ADDIE untuk siswa SMK,” Semin. Nas. Sains dan Teknol. Terap. VI, pp. 509–514, 2018, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/download/333/203.
B. D. Meilani and S. Sulistyowati, “Teknologi Sterilisasi Ozon Dan Mesin Pendingin Sebagai Upaya Pemberdayaan Ekonomi Maritim Masyarakat Nelayan Kampung Mandar Banyuwangi Jawa Timur,” Sains dan Teknol., 2018.
R. Rotul and Farida, “Geometric Invariant Moment Pada Aplikasi Image Retrieval Pendeteksian Batik Parang Rusak/Barong Yogyakarta,” Semin. Nas. Sains dan Teknol. Terap. VI 2018, pp. 521–526, 2018.
R. A. Firmansyah and E. Alfianto, “Rancang Bangun Driver Motor Dc Untuk Automatic Guided Vehicle Dengan Komunikasi Rs485 Menggunakan Fuzzy Logic Controller,” pp. 527–532.
F. Rahman, Z. J. H. Tarigan, and Lukmandono, “Disain Relayout Warehouse Dengan Pendekatan Slp (Systematic Layout Planning) Dan Class Based Storage Untuk Meminimumkan Biaya Material Handling,” Semin. Nas. Sains dan Teknol. Terap. VI 2018 Inst. Teknol. Adhi Tama Surabaya, pp. 533–540, 2018.
dan H. S. Theresia MCA1, Amrita Winaya1, “Kapasitas simpang tak bersinyal dan tundaan lalu lintas pada jl.brigjen katamso-frontage timur,” J. Teknol. Adhi Taman Surabaya, pp. 573–578, 2018.
F. Wahmuda and M. J. Hidayat, “Makna Tampilan Visual Kemasan Sebagai Penerapan Redesain Kemasan Makanan Ringan Di Ukm Benok–Kabupaten Probolinggo,” Pros. Semin. Nas. Sains …, vol. 2, pp. 579–584, 2018, [Online]. Available: https://ejournal.itats.ac.id/sntekpan/article/view/385.
H. Nugroho, M. Hakimah, A. W. Azinar, P. Studi, T. Informatika, and F. T. Informasi, “Mengukur Tingkat Image Enhancement Metode Biliner Interpolation Pada Citra Zoom Histogram,” J. Sains dan Teknol. Terap., pp. 599–604, 2018.
M. Sayid, I. Abdillah, E. A. Zuliari, T. Elektro, I. Teknologi, and A. Tama, “Analisa Kinerja Motor Induksi 3 Fasa Pada Pompa Sentrifugal Di Favehotel Rungkut Surabaya,” Inst. Teknol. Adhi Tama Surabaya, pp. 605–610, 2018.
C. Mardiana and N. Adiani, “Pemanfaatan Marketing Tools Dalam Pemasaran Produk Ukm Sepatu Kulit Di Desa Seruni Sidoarjo,” Pros. Semin. Nas. Sains dan …, pp. 611–618, 2018, [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/384.
A. Fahruzi, A. Suryowinoto, and A. Akhmad Suherman, “Rancang Bangun Mesin Penetas Burung Murai Berbasis Mikrokontroler ATMEGA16,” Inst. Teknol. Adhi Tama Surabaya, vol. 4, no. 2, pp. 93–101, 2018.
B. D. Meilani and Subianto, “The Application of Mobile Geographic Information System (MGIS) for Android-based Mapping of Micro, Small and Medium Enterprises,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012019.
D. H. Sulaksono and A. C. P. Siregar, “Power Loss Classification on Shifts Based on SMS (Singlemode-Multimode-Singlemode) Structured Fiber Optic Using Gaussian Naïve Bayes Method,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012024.
D. Pertiwi, S. Soebagio, and E. Rudianto, “Effect of additive type D and F on concrete strength capacity by using aggregate type, size, and content: Lumajang sand – Bangkalan gravel,” pp. 128–134, 2018, [Online]. Available: http://iptek.its.ac.id/index.php/jps/article/view/4635.
D. P. E. Laksmiyanti and R. P. Salisnanda, “Atrium Form and Thermal Performance of Middle-Rise Wide Span Building in Tropics,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012030.
D. P. Hapsari, W. M. Rahmawati, and D. H. Sulaksono, “Mobile System Application for Tourist Guide in Surabaya,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 57–63, 2018, doi: 10.12962/j23546026.y2018i6.4622.
D. Y. Purwaningsih, D. R. Zuchrillah, and I. Nurmala, “The Effect of Raja Banana Peel Extract on Acid and Peroxide Numbers in Bulk Frying Oil,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012034.
D. K. Fitriyah, J. Propika, L. L. Lestari, H. Istiono, D. Pertiwi, and R. Sekartadji, “Pile Foundation Analysis on High - Rise Building using Finite Element-Spring Method on Sandy Clay Soil,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012045.
A. Budianto, E. Kusdarini, S. S. W. Effendi, and M. Aziz, “The Production of Activated Carbon from Indonesian Mangrove Charcoal,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, pp. 0–7, 2019, doi: 10.1088/1757-899X/462/1/012006.
M. Basuki, Lukmandono, and M. M. Zau Beu, “Implementation IMO Regulation of Ballast Water Management at Inaport 2nd Jakarta Based Environmental Risk Assessment,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012044.
P. I. Santosa, “The Configuration of Engine-Sail Catamaran Fishing Vessel,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012008.
Lukmandono, M. Basuki, M. J. Hidayat, and F. B. Aji, “Application of Saving Matrix Methods and Cross Entropy for Capacitated Vehicle Routing Problem (CVRP) Resolving,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012025.
Lukmandono, N. L. P. Hariastuti, Suparto, and D. I. Saputra, “Implementation of Waste Reduction at Operational Division with Lean Manufacturing Concept,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012049.
Yulfiah, “Formulating a Plan Model for Controlling Water Pollution in Kali Surabaya Based on Obedience Analysis of IPLC Implementation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012007.
D. Khusna, A. Susilo, Sudarto, and A. Suharyanto, “The Influence of the Piston Head Shape on the Performance of a Single Cylinder Diesel Engine: An Experimental Study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012039.
E. Novianarenti, G. Setyono, and A. G. Safitra, “Experimental Study of the Performance Characteristic an Induced Draft Cooling Tower with Variates Fillings,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012027.
E. Alfianto, A. Sa’Diyah, F. Rusydi, and I. Puspitasari, “High-Performance Computing (HPC) design to improve the quality of Introduction of Parallel Computing lectures,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012020.
E. Yuliawati, P. Pratikto, S. Sugiono, and O. Novareza, “A Review of Structural Relationships in Closed-Loop Supply Chain Model,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 90–97, 2018, doi: 10.12962/j23546026.y2018i6.4626.
F. Harianto, M. F. N. Aulady, F. T. Nuciferani, and S. Hariyadi, “The Influence of Safety Posters on Employee Compliance in Creating a Culture of Workplace Safety and Health in the Construction of Serbaguna Community Centre Sidoarjo Building,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012022.
G. S. Utami and B. A. M. Bali, “Slope Stability Analysis under a Complex Geotechnical Condition - A Case Study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012014.
H. Nugroho, W. Widodo, R. K. Hapsari, and L. A. Hermanto, “Feature Extraction Shape Kawi Numbers and Java Images Using the Zernike Moment,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012017.
I. Komara, E. Wahyuni, P. Suprobo, and K. Taşkin, “Micro-Structural Characterization of the bond strength capacity of adhesive material in the alternative of cold-formed steel frame system,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012004.
I. P. A. I. Kusuma and M. Z. B. Margareta, “Analysis of Channels Impulse Response Due to Transducer Movements in Underwater Acoustic Communication,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012021.
A. Khomsah, Sudjito, Wijono, and A. S. Laksono, “Pico-hydro as A Renewable Energy: Local Natural Resources and Equipment Availability in Efforts to Generate Electricity,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012047.
B. Setyono, D. A. Patriawan, A. W. Putra, H. Irawan, and E. A. Zuliari, “Design Steering System with Independent Front Wheel Drive of the Hybrid Vehicle-Air Pressure and Electrical,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012013.
S. O. Hamsan, E. Poedjioetami, and F. H. Hendra, “Application of Organic Architecture in School of Nature Design,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 20–24, 2019, doi: 10.12962/j23546026.y2018i6.4668.
F. H. Hendra, A. Antariksa, A. M. Nugroho, and A. S. Leksono, “Bioclimatic Adaptation of Typical Houses in Kampong’S Surabaya,” J. Archit., vol. 17, no. 2, p. 127, 2018, doi: 10.12962/j2355262x.v17i2.a4322.
H. A. Sujono, Ariadi, R. Sulistyowati, and H. Suryoatmojo, “Static Photovoltaic Array Partially Shaded Condition with Boost Converter Using Perturb & Observe Algorithm,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, pp. 6–13, 2019, doi: 10.1088/1757-899X/462/1/012011.
R. Fajarini, I. Ratniarsih, and Sukarnen, “The Application of Adaptive Concept Form of Tissue Culture Laboratory Building in Black Orchid Research and Development Center in Samarinda,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
B. W. Sulistyo, A. Antariksa, S. Surjono, and L. Hakim, “A Comparative Study of Public Open Space Handling Methodology in Urban Area,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 85–89, 2019, doi: 10.12962/j23546026.y2018i6.4671.
S. Azizah, “Alternative Development Designs of a Culinary Center in Surabaya that Attract more Customers,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 110–114, 2018, doi: 10.12962/j23546026.y2018i6.4628.
A. W. Ekaraga, W. W. Widjajanti, and B. W. Sulistyo, “The Applications of Traditional Javanese Architecture with Javanese Philosophy for East Java Cultural Attractions Complex in Surabaya,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 1–5, 2018, doi: 10.12962/j23546026.y2018i6.4618.
Suheni, R. Sunoko, S. Wahyudi, and A. S. Leksono, “Numeric Simulation of the Effect of Varying Velocities on Catalytic Converter and Exhaust Gas Emission,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012040.
J. Propika, L. Lestari, and J. Muti, “The Use of Box Culvert Precast as a Main Bridge Structure in Arterial Highway Road: An Analysis Study,” IPTEK J. Proc. Ser., vol. 0, no. 6, pp. 115–122, 2018, doi: 10.12962/j23546026.y2018i6.4629.
J. Caroline, “An Analysis of Lead (Pb) Levels in the Urine of Gas Station Operators Based on Individual Characteristics (A Case Study at Kali Rungkut and Panjang Jiwo Gas Station Surabaya), IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
K. H. Putra, “The Effect of Coal Powder Addition to Asphalt Concrete - Wearing Course (AC-WC) Mixture to Increase Road Surface Hardness Quality, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
L. L. Lestari, “Assessment to Mechanical Material Properties of Natural and Metakaolin based Geopolymer Stabilized Soil”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
M. K. Wardani, “The Effect of variations in PVD installation distance and thickness of soft soil layer for the degree of consolidation and time of consolidation at Gunung Anyar, Surabaya”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
M. F. N. Aulady, “Policy Implication For Economic Losses Reduction Due To Earthquake Disaster In Bantul City, Indonesia”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
M. D. Kuriawan. Aulady, “Premise Parameter Optimization On Adaptive Network Based Fuzzy Inference System Using Modification Of Hybrid Particle Swarm Optimization And Genetic Algorithm”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
N. F. Rozi. Aulady, “The Development of LIDI: A Web- Based Car Rent Marketplace Application in Sidoarjo, Indonesia”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
N. Rahmawati. Aulady, “Inventory and Transportation Models for Multi-item Single-Supplier through Purchasing Consortium for the Fishpond Manager”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
R. R. Putri, “Automatic Identification of Acute Lymphoblastic Leukemia on Blood Cell An image Using Geometric Features”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
R. Sulistyowati, “Prototype of the Monitoring System and Prevention of River Water Pollution Based on Android”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
R. Mahmud, “Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Small Diesel Engine-Like Condition. 3th Report: Effect of Oxygen Concentration”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
R. Utami, “The Implementation of Economic Order Quantity for Raw Material Planning in SME Producing Terasi Crackers”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
S. Julaika, “Application of Electrocoagulation Methods to Reduce BOD and COD Content in The Soft Drink Industry's Wastewater with Addition Bittern”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
S. H. Laksono, “Factors That Influence Optimization Open Space Under the Jenggolo Sidoarjo Flyover”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
S. Agustini, “Mobile Application for English Reading Comprehension”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
S. Choriyah, “An Analysis of Concrete Test Weight with Different Water Cement Factors Using Histogram in Quality Management”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Suhartini, “Implementation of Kano Methods to Service Quality Improved at PT. Pos Indonesia”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Suhartini, “Implementation of Lean Services in Hospitals To Improve The Efficiency of Patient Services in The Organization Of Health Social Security (BPJS)”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
S. Muharom, “Design of Wheelchairs Robot Based on ATmega128 to People with Physical Disability”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Syamsuri, “Analysis of Location Tracker Devices (GPS Microcontroller STM 32) on The Position of Solar-powered Electric Bicycles”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Trisnawati, “Design And Simulation Of Electric Center Distribution Panel Based On Photovoltaic System”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
V. A. Setyowati, “Normalising of 316L Stainless Steel using Temperature and Holding Time Variations”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
W. S. Pambudi, “Identification of Flip Folder Model on Folding Machine”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
W. Mistarika, “Image Compression and Encryption Using DCT and Gaussian Map”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
W. E. P. Tyas, “Asbestos-free Brake Pad Using Composite Polymer Strengthened With Rice Husk Powder”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Y. Erdhianto, “The Determination of Product Distribution Route based on Nearest Neighbour and Genetic Algorithm”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Y. W. Mirzayanti, “Triglyceride of Kapok Seed Oil to Biofuel Over A Synthesised Cu-Mo Supported HZSM-5 Catalyst”, IOP Conf. Ser. Mater. Sci. Eng., vol. 462, no. 1, 2019, doi: 10.1088/1757-899X/462/1/012031.
Refbacks
- There are currently no refbacks.