The Effect of Using Styrofoam As Additional Material For Asphalt Concrete Layer (Laston) – WC With BNA BLE

Arintha Indah Dwi Syafiarti, Fadlil Jalil Aslim, Gati Sri Utami, Ratih Sekartadji

Abstract


Asphalt concrete layer (laston) has a high degree of flexibility so that placing it directly on top of layers such as AC-WC (Asphalt Concrete – Wearing Course) makes this layer vulnerable to damage due to high temperatures and heavy traffic loads. The type of damage that often occurs in the laston is the release of granules and cracks. Styrofoam is a type of plastic polymer that is thermoplastic when heated it becomes soft and hardens when cold. When mixed with gasoline, styrofoam will soften and can function as an adhesive. This study was to determine the value of Marshall characteristics in the addition of styrofoam into the asphalt.variations used for styrofoam content are 1%, 1.5%, 2% with asphalt content of 4.5%, 5.0%, 5.5%, 6.0%. The results showed that the optimum asphalt value was obtained at 6% asphalt content. And the mixture that meets the requirements is the addition of 1% styrofoam. Higher content of styrofoam will reduce the value of the melt (flow) and will reduce the value of Marshall stability.

Keywords


Styrofoam; Asphalt dditive; Marshall stability

Full Text:

PDF

References


Imam Mujiarto, “SIFAT DAN KARAKTERISTIK MATERIAL PLASTIK DAN BAHAN ADITIF,” Traksi, vol. 3, no. 2, Dec. 2005.

I. B. D. Giri and I. K. Sudarsana, “KUAT TEKAN DAN MODULUS ELASTISITAS BETON DENGAN PENAMBAHAN STYROFOAM (STYROCON),” vol. 12, no. 1, p. 11, 2008.

Silvia Sukirman, Perkerasan Lentur Jalan Raya. Bandung: Nova, 1999.

Anas Tahir, “KARAKTERISTIK CAMPURAN BETON ASPAL (AC-WC) DENGAN MENGGUNAKAN VARIASI KADAR FILLER ABU TERBANG BATU BARA,” J. SMARTek, vol. 7, no. 4, pp. 256–278, Nov. 2009.

Sri Wahyuni Dehi, Frice Lahmudin Desei, and Fadly Achmad, “KARAKTERISTIK MARSHALL CAMPURAN ASPAL LASTON LAPIS AUS (AC-WC) MENGGUNAKAN KAPUR PADAM SEBAGAI BAHAN PENGISI (FILLER),” Universitas Negeri Gorontalo, Gorontalo, 2018.

Moh. Mahli, “PENGARUH PENGGUNAAN LIMESTONE SEBAGAI FILLER PADA ASPHALT CONCRETE – WEARING COURSE (AC-WC),” Universitas Mataram, Mataram, 2017.

Zainal Abidin, Bunyamin, and Febrina Dian Kurniasarir, “Uji Marshall Pada Campuran AC-WC Dengan Substitusi Filler,” J. Serambi Eng., vol. 6, no. 1, pp. 1631–1638, Jan. 2021, doi: 10.32672/jse.v6i1.2653.

Hasmiati and La Ode Muhamad Nurakhmad Arsyad, “MIX DESIGN ASPHALT CONCRETE WEARING COURSE (AC-WC) DENGAN MENGGUNAKAN FLY ASH BATU BARA SEBAGAI PENGGANTI FILLER,” J. Stabilita, vol. 2, no. 1, pp. 133–144, Jan. 2014.

Elsa Eka Putri and Syamsuwirman, “TINJAUAN SUBTITUSI STYROFOAM PADA ASPAL PEN. 60/70 TERHADAP KINERJA CAMPURAN ASPHALT CONCRETE - WEARING COURSE (AC-WC),” J. Tek. Sipil Univ. Syiah Kuala, vol. 6, no. 1, pp. 105–114, Sep. 2016.

Emil Adly, “Styrofoam sebagai Pengganti Aspal Penetrasi 60/70 dengan Kadar 0%, 6,5%, 7,5%, 8,5%, dan 9,5% pada Campuran AC-WC,” Cent. Civ. Electr. Eng. J., vol. 11, no. 1, pp. 41-49`, Jun. 2016.

Muhammad Diffa Nur Ilham, “PENGARUH PENAMBAHAN STYROFOAM PADA ASPAL PORUS (AC-WC) TERHADAP KARAKTERISTIK MARSHALL,” Universitas Negeri Yogyakarta, 2019.

Iman Satyarno, “Penggunaan Semen Putih untuk Beton Styrofoam Ringan (BATAFOAM),” presented at the Seminar Nasional Inovasi Teknologi Bahan Bangunan Untuk Meningkatkan PAD dan Beberapa Kemajuan Untuk Menyelesaikan Permasalahan Bidang Teknik Sipil, Yogyakarta, Jun. 2004.

Eggi Luftiawan and Sigit Pranowo Hadiwardoyo, “BUTON NATURAL ASPAL (BNA) SEBAGAI BAHAN TAMBAH PADA ASPAL BETON CAMPURAN PANAS MENGATASI DEFORMASI AKIBAT BEBAN RODA,” Universitas Indonesia, Depok, 2013.




DOI: https://doi.org/10.31284/j.iptek.2022.v26i1.2433

Refbacks

  • There are currently no refbacks.