POLYMER ELECTROLYTE MAKING FROM EUGENOL AND DIRECT METHANOL FUEL CELLS

Eka Cahya Muliawati

Abstract


The continuous use of hydrocarbon fuels results in fossil fuel supply as natural resources that cannot be renewed. Another problem that is also caused is the occurrence of environmental pollution and global warming. Therefore, it is necessary to look for alternative energy that is sustainable and economical with low emissions. One alternative energy that has received attention to be developed is the fuel cell. A fuel cell is an electrochemical device that directly converts chemical energy from a redox reaction into electrical energy [1].

Full Text:

PDF

References


Jia Ma, Yogeshwar Sahai. (2013). Chitosan biopolymer for fuel cell applications. Carbohydrate Polymers, vol, no. 92, pp, 955-975.

Vaughan H., Hoda Jafarizadeh-Malmiri, Aydin Berenjian and Navideh Anarjan. (2013). Recent advances in the application of chitosan in fuel cells. Sustainable Chemical Processes, vol. 46, no. 12, pp. 1- 16.

Yusun Heo, Sungjin Yun, Hyung Im, Jooheon Kim, (2012). Low Methanol Permeable Sulfonated Poly(ether imide)/Sulfonated Multiwalled Carbon Nanotube Membrane for Direct Methanol Fuel Cell. Journal of Applied Polymer Science, vol. 20, no. 11, pp. 1-11.

Tohidian M, Seyed Reza Ghaffarian and Mohammad Mahdi Hasani-Sadrabadi. (2013). Organically modified montmorillonite and chitosan phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications. J Solid State Electrochem, vol. 17, no. 8, pp. 2123–2137.

Yuan Ting, Longjuan Pu, Qinghong Huang, Haifeng Zhang, Xuemei Li, Hui Yang. (2014). An effective methanol-blocking membrane modified with graphene oxide nanosheets for passive direct methanol fuel cells. Electrochimica Acta, vol. 117, no. 12, pp. 393 – 397.

Lin Lu, J., Qing Hong Fang, Sheng Li Li, San Ping Jiang, (2013), “A novel phosphotungstic acid impregnatedmeso-Nafion multilayer membrane for proton exchange membrane fuel cells”, Journal of Membrane Science, Vol. 427, 101-107.

Lufrano, F., V. Baglio, P. Staiti, V. Antonucci, A.S. Arico. (2013). Performance analysis of polymer electrolyte membranes for direct methanol fuel cells. Journal of Power Sources, vol. 243, no. 18, pp. 519-534.

Wang, Y., Jiang, Z., Li, H., Yang, D. (2010). Chitosan membranes filled by GPTMS modified zeolite beta particles with low methanol permeability for DMFC. Chemical Engineering and Processing, vol. 49, no. 4, pp. 278-285.

Othman, M.H.D., A.F Ismail., A. Mustafa. (2010). Recent Development of Polymer Electrolyte Membranesfor Direct Methanol Fuel Cell Application – A Review. Malaysian Polymer Journal, vol. 5, no.2, pp. 1-36.

Bai H, Haoqin Zhang, Yakun He, Jindun Liu, Bing Zhang, Jingtao Wang. (2014). Enhanced proton conduction of chitosan membrane enabled by halloysite nanotubes bearing sulfonate polyelectrolyte brushes. Journal of Membrane Science, vol. 454, no. 56, pp. 220 – 232.

Bose, S., Kuila, T., Nguyen, T.X.H., Kim, N.H., Lau, K., Lee, J.H. (2011). Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges. Progress in Polymer Science, vol.36, no. 21, pp. 813–843.

Kausar A. (2014). Proton exchange fuel cell membranes of poly (benzimidazoleamide)/ sulfonated polystyrene/titania nanoparticles grafted multi walled carbon nanotubes. Journal of Plastic Film and Sheeting, vol. 18, no. 7, pp. 1-19.


Refbacks

  • There are currently no refbacks.


Katalog Buku Karya Dosen ITATS